PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.

Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Set 1501 – cut 5 – contains 15 small tungsten carbide burrs in the most common shapes and dimensions for general applications. The sturdy plastic box protects the tools from dirt and damage.

Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:

• Cylindrical With End Cut ( ZYAS 02mm x 10mm x 03mm Shank)
• Cylindrical With End Cut ( ZYAS 03mm x 13mm x 03mm Shank)
• Cylindrical With End Cut ( ZYAS 06mm x 07mm x 03mm Shank)
• Cylindrical With End Cut ( ZYAS 06mm x 13mm x 03mm Shank)
• Flame Shape ( B 03mm x 07mm x 03mm Shank)
• Ball Shape ( KUD 04mm x 03mm x 03mm Shank)
• Cylindrical Shape with Radius End “Bullnose” ( WRC 02mm x 10mm x 03mm Shank)
• Cylindrical Shape with Radius End “Bullnose” ( WRC 03mm x 13mm x 03mm Shank)
• Pointed Tree Shape ( SPG 03mm x07mm x03mm Shank)
• Conical pointed Shape ( SKM 06mm x 13mm x0 3mm Shank)
• Round Tree Shape (RBF 03mm x 07mm x 03mm Shank)
• Round Tree Shape (RBF 06mm x 13mm x 03mm Shank)
• Oval Shape ( TRE 03mm x 07mm x 03mm Shank)
• Oval Shape ( TRE 06mm x 10mm x 03mm Shank)
• Inverted Cone Shape ( WKNS 03mm x 07mm x 03mm Shank)

Advantages:
- Good stock removal performance and tool life.
- Exceptional dimensional stability. (No change in geometry due to wear.)
- Suitable for Electric as well as Pneumatic Tool Drives.
- Minimal vibration and noise.
- Easy and comfortable handling.

Operating Instructions:
- Observe the following recommended rotational speed:

• Steel and Cast Steel < 38 HRC : 48 000 – 64 000 RPM
• Steel and Cast Steel > 38 HRC : 37 000 – 48 000 RPM
• Stainless Steel : 37 000 – 48 000 RPM
•  Hard Non Ferrous Metals : 37 000 – 48 000 RPM
•  High Temperature Resistant Materials : 28 000 – 48 000 RPM
  

- Maximum Overhang = 10mm
- Clamping Depth = 20mm
- For optimum performance use machines with a power output of 75 - 300 watts.
- Only use machines that are intended for use with the relevant tool.
- The burr surface in contact with the workpiece should not exceed 1/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.
- Ensure correct and suitable personal protective equipment is worn while using the tool.

For further operating instructions or product information, please visit www.pferd.com or any of our social media pages