PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.

Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Set 1503 – cut 3 PLUS – contains 15 small tungsten carbide burrs in the most common shapes and dimensions for general applications. The sturdy plastic box protects the tools from dirt and damage.

Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:

• Cylindrical With End Cut ( ZYAS 03mm x 13mm x 03mm Shank)
• Cylindrical With End Cut ( ZYAS 06mm x 13mm x 03mm Shank)
• Ball Shape ( KUD 04mm x 02mm x 03mm Shank)
  
• Ball Shape ( KUD 04mm x 03mm x 03mm Shank)
• Ball Shape ( KUD 06mm x 05mm x 03mm Shank)
• Cylindrical Shape with Radius End “Bullnose” ( WRC 03mm x 13mm x 03mm Shank)
• Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 03mm Shank)
• Pointed Tree Shape ( SPG 03mm  x13mm x03mm Shank)
• Pointed Tree Shape ( SPG 06mm x 13mm x03mm Shank)
• Conical pointed Shape ( SKM 03mm x 11mm x0 3mm Shank)
• Conical pointed Shape ( SKM 06mm x 13mm x0 3mm Shank)
• Round Tree Shape (RBF 03mm x 07mm x 03mm Shank)
• Round Tree Shape (RBF 06mm x 13mm x 03mm Shank)
• Oval Shape ( TRE 03mm x 07mm x 03mm Shank)
• Oval Shape ( TRE 06mm x 10mm x 03mm Shank)

Advantages: 

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Operating Instructions:
- Observe the following recommended rotational speed:

• Steel and Cast Steel < 38 HRC : 48 000 – 64 000 RPM
•  Steel and Cast Steel > 38 HRC : 27 000 – 37 000 RPM
• Stainless Steel : 27 000 – 37 000 RPM
•  High Temperature Resistant Materials : 27 000 – 48 000 RPM
  
• Cast Iron: 48 000 - 64 000 RPM

- Maximum Overhang = 10mm
- Clamping Depth = 20mm
- For optimum performance use machines with a power output of 75 - 300 watts.
- Only use machines that are intended for use with the relevant tool.
- The burr surface in contact with the workpiece should not exceed 1/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.
- Ensure correct and suitable personal protective equipment is worn while using the tool.

For further operating instructions or product information, please visit www.pferd.com or any of our social media pages