PFERD Tungsten Carbide Burr ALU Cut –Ball Shape 08mm x 07mm x 6mm shank
Available for Delivery and Collection
Delivery Options:
- Door-to-door delivery via DSV Courier
- Delivery to DSV Locker
Collection Locations:
- PFERD Kempton Park Branch
- PFERD Pretoria Branch
- PFERD Durban Branch
- PFERD Cape Town Branch
- PFERD Gqeberha (Port Elizabeth)
Have a question? Ask an expert +27 11 230 4000 or email us sales@pferd.co.za
PFERD offers a wide range of Tungsten Carbide Burrs available in various sizes and shapes. These burrs feature cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding performance, a long service life, and excellent stock removal rates.
PFERD has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate. Tree-shaped burr with radius end according to DIN 8032.
Advantages:
- Extremely high stock removal rate.
- Large chips.
- Reduced material adhesion.
- Long tool life and smooth running.
- Can be used with cutting speeds of up to 1,100 m/min.
- The highly accurate concentricity enables impact
-free working without creating chatter marks, considerably reducing wear on the tool and tool drive.
Specifications:
- Shape: Ball Shape (KUD)- Head Diameter: 8mm
- Head Length: 7mm
- Shank Diameter: 6mm
- Overall Length (including shank): 47mm
Operating Instructions:
- Observe the following recommended rotational speeds:
• Aluminium Alloys – Coarse stock removal: 24 000 – 44 000 RPM
• Aluminium Alloys – Fine stock removal: 36 000 – 44 000 RPM
• Brass, Copper, Zinc – Coarse stock removal: 24 000 – 44 000 RPM
• Brass, Copper, Zinc – Fine stock removal: 36 000 – 44 000 RPM
• Hard Aluminium Alloys – Coarse stock removal: 24 000 – 44 000 RPM
• Hard Aluminium Alloys – Fine stock removal: 36 000 – 44 000 RPM
• Bronze – Coarse stock removal: 24 000 – 44 000 RPM
• Bronze Alloys – Fine stock removal: 24 000 – 44 000 RPM
• Thermo- & Fibre-reinforced Plastics: 24 000 – 44 000 RPM
- Maximum Overhang: 10mm
- Clamping Depth: 20mm
- For optimum performance, use machines with a power output of more than 300 watts.
- Only use machines that are intended for use with the relevant tool.
- The burr surface in contact with the workpiece should not exceed one-third of the total burr circumference to prevent tooth breakage from vibration and chattering.
- Ensure correct and suitable personal protective equipment is worn while using the tool.
For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.