PFERD POLINOX cross buffs consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive is star-shaped and stacked in layers which are connected in the centre. Particularly suitable for narrow application areas and hard-to-reach places such as drilled holes and indentations. POLINOX cross buffs are suitable for cleaning, deburring and fine grinding of inner surfaces and contours.

Advantages:

• Highly flexible, enabling optimal adjustment to the contour.
• Cool grinding and low thermal load on the workpiece.
• The open structure and high flexibility of the non-woven material prevents tool clogging.
  

Specifications:
- POLINOX NON-WOVEN Cross Buff: 38mm
- Aluminium Oxide Grain.
- Grit: 100 (Medium) and 280 ( Fine)
- Thread 8-32 UNC

Operating instruction:
- Optimum cutting speed RPM: 7 500 (15 m/s).
- Maximum RPM: 12 600 RPM (20 m/s)
- To avoid breakage, the maximum permissible RPM should not be exceeded under any circumstances.
- Contact pressure to be reduced if optimum recommended RPM is exceeded.
- Ensure correct and suitable personal protective equipment is worn while using the tool.

For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.