PFERD's COMBIDISC for aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side.

Advantages:
- High economic efficiency as tool can be changed quickly.
- Very comfortable due to ease of use and low-vibration working.
- No disruptions in use due to adhesion, slipping or coming loose.
- Suitable for a variety of materials including steel and stainless steel.
- High Stock Removal.
- Reduced heat in the grinding zone.
- Consistent performance and surface finish.
- High economic efficiency.
- Convenient and safe.
- Suitable for electric and pneumatic tool drives.

Specifications:
- Size: 50mm diameter
- CDR System with thread
- Grit Size: 36 (Coarse) ; 60 (Medium) ; 80 (Fine); 120 (Very Fine)
- Abrasive Grain: CERAMIC Oxide
- 50 Discs within the box.

Recommendations for use:
- Use COMBIDISC abrasive discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
- Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Operating instruction:
- Observe the recommended rotational speed – Maximum operating speed is : 80m/s or 13 000 RPM.
- Only use grinding machines that are intended for use with the relevant tool.
- Ensure correct and suitable personal protective equipment is worn while using the tool.

For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.