PFERD's innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc.

Special tool for processing aluminium alloys using an angle grinder. Also suited to peripheral milling and milling out root seams. HSD-R version for radial applications.

Advantages:

• Does not generate hazardous or explosive dust.
• An extraction system is not required.
• Cost-effective and eco-friendly alternative to grinding wheels and flap discs of comparable weight.
• Innovative, robust cut geometry for maximum safety, extreme durability and ease of work.
• Specially developed, turnable and replaceable tungsten carbide cutting inserts.
• Exceptionally high stock removal rate.

Specifications:
- Size: 115mm x 8mm x 22,23mm

Operating instruction:

• Observe the recommended rotational speed – Maximum operating speed is: 80m/s or 13 300 RPM
• The tool has primarily been designed for use on aluminium, wrought aluminium alloys and cast aluminium. Non-ferrous metals with a relatively low strength and fibre-reinforced plastics can also be machined. This must be checked for the specific application on a case-by-case basis.
• Do not push the tool deep into the workpiece. The milling disc is not a cutting tool.
• Do not exert unnecessarily high forces on the tool: The ALUMASTER High Speed Disc already works with low forces.
• When machining workpiece edges, cut along the edge, never across the edge.
• Do not decelerate the tool on the workpiece. The cutting inserts may break.
  

Safety Notes

• It is essential to tighten the flange nut using the appropriate tool, such as a face pin wrench. Clamping systems which are designed to be tightened without the use of an additional tool, i.e. which are tightened by hand, are not permissible.
• Tighten the mounting bolts of the cutting inserts using the Torx key provided. If used properly, it is designed to provide a tightening torque of around 4 Nm. Alternatively, use a torque spanner with a tightening torque of 4 Nm.
• Loose cutting inserts may break during use. Therefore, check regularly whether they are attached securely.
• Do not use damaged cutting inserts! They may break!

For further operating instructions or product and safety information, please visit www.pferd.com or any of our social media pages.