{"product_id":"pferd-tungsten-carbide-burr-flame-shape-10mm-x-20mm-x-6mm-shank-universal-cut","title":"PFERD Tungsten Carbide Burr Flame Shape 10mm x 20mm x 6mm shank Universal Cut","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Suitable for universal use.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Economic machining of a wide range of materials.\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e- Shape : Pointed Tree Shape \u003cem\u003e(SPG)\u003c\/em\u003e\u003cbr\u003e- Head Diameter: 10mm\u003cbr\u003e- Head Length: 20mm\u003cbr\u003e- Shank Diameter: 6mm\u003cbr\u003e- Overall Length including shank: 65mm\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' style=\"color: rgb(255, 42, 0);\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 14 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' style=\"color: rgb(255, 42, 0);\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 8 000 - 14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' style=\"color: rgb(255, 42, 0);\"\u003e Stainless Steel : 8 000 - 11 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' style=\"color: rgb(255, 42, 0);\"\u003e Hard Non Ferrous Metals : 8 000 - 14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' style=\"color: rgb(255, 42, 0);\"\u003e Soft Non Ferrous Metals : 19 000 - 29 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' style=\"color: rgb(255, 42, 0);\"\u003e Cast Iron : 14 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e- Maximum Overhang = 10mm \u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of 300 500 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr\u003e\u003cbr\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":54499425354017,"sku":"21322612","price":427.23,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/spg-1020-6-mx-ncc-rgb.png?v=1794404096","url":"https:\/\/pferdza.com\/products\/pferd-tungsten-carbide-burr-flame-shape-10mm-x-20mm-x-6mm-shank-universal-cut","provider":"PFERD South Africa","version":"1.0","type":"link"}