{"title":"Universal Cylindrical End Mill with Centre Cut - UC","description":"","products":[{"product_id":"pferd-solid-carbide-endmill-cylindrical-shape-with-four-blades","title":"PFERD Solid Carbide End mill - Universal Cylindrical Shape with four blades","description":"\u003cp\u003ePFERD solid tungsten carbide end mills are suitable for universal use on a variety of materials. Mills for various applications, from roughing through to finishing. The chamfer design is also suitable for ramping. Smooth straight shank HA in accordance with DIN 6535.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e- Design with neck chip channel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UC4-M030C-M57HA6 AL40","offer_id":51251837206817,"sku":"23000148","price":877.22,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M040C-M57HA6 AL40","offer_id":51251837239585,"sku":"23000149","price":876.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M050C-M57HA6 AL40","offer_id":51251837272353,"sku":"23000150","price":876.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M060C-M57HA AL40","offer_id":51251837305121,"sku":"23000151","price":876.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M080C-M63HA AL40","offer_id":51251837337889,"sku":"23000152","price":1258.5,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M100C-M72HA AL40","offer_id":51251837370657,"sku":"23000153","price":1817.35,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M120C-M83HA AL40","offer_id":52879158772001,"sku":"23000154","price":2956.77,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M160C-M92HA AL40","offer_id":52879158804769,"sku":"23000155","price":5287.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M200C-M104HA AL40","offer_id":52879158837537,"sku":"23000156","price":8818.14,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-uc4-m030c-m57ha6-al40-rgb.png?v=1746540512"},{"product_id":"pferd-solid-carbide-deburring-chamfering-end-mill-conical-shape","title":"PFERD Solid Carbide Deburring \/ Chamfering End mill - Universal Conical Shape 60°","description":"\u003cp\u003e\u003cspan\u003ePFERD TOOLS solid carbide end mills for deburring and chamfering. The solid carbide end mills are suitable for universal use in a variety of materials.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWeldon shank HB in accordance with DIN 6535 with lateral driving surface.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UD4-M060A60°-HB AL40","offer_id":52633249448225,"sku":"23000116","price":1016.3,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UD5-M080A60°-HB AL40","offer_id":52633249480993,"sku":"23000117","price":1478.6,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UD6-M100A60°-HB AL40","offer_id":52633249513761,"sku":"23000118","price":1946.5,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UD6-M120A60°-HB AL40","offer_id":52633249546529,"sku":"23000119","price":3206.4,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-ud4-m060a60-hb-al40-rgb.png?v=1777897190"},{"product_id":"pferd-solid-carbide-end-mill-cylindrical-shape-with-six-blades","title":"PFERD Solid Carbide End mill - Universal Cylindrical Shape with six blades","description":"\u003cp\u003ePFERD solid tungsten carbide end mills are suitable for universal use on a variety of materials. Mills for various applications, from roughing through to finishing. The chamfer design is also suitable for ramping. Smooth straight shank HA in accordance with DIN 6535.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e- Design with neck chip channel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UC6-M060S-M57HA AL40","offer_id":52879312847137,"sku":"23000174","price":877.22,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M080S-M63HA AL40","offer_id":52879312879905,"sku":"23000175","price":1257.99,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M100S-M72HA AL40","offer_id":52879312912673,"sku":"23000176","price":1817.63,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M120S-M83HA AL40","offer_id":52879312945441,"sku":"23000177","price":2956.77,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M160S-M92HA AL40","offer_id":52879312978209,"sku":"23000178","price":5288.45,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-uc6-m060s-m57ha-al40-rgb.png?v=1782132350"},{"product_id":"pferd-solid-carbide-end-mill-cylindrical-shape-with-eight-blades","title":"PFERD Solid Carbide End mill - Universal Cylindrical Shape with eight blades","description":"\u003cp\u003ePFERD solid tungsten carbide end mills are suitable for universal use on a variety of materials. Mills for various applications, from roughing through to finishing. The chamfer design is also suitable for ramping. Smooth straight shank HA in accordance with DIN 6535.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e- Design with neck chip channel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UC8-M200S-M104HA AL40","offer_id":52879994847521,"sku":null,"price":8817.91,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-uc8-m200s-s104ha-al40-rgb.png?v=1782132772"},{"product_id":"pferd-solid-carbide-deburring-chamfering-end-mill-conical-shape-90","title":"PFERD Solid Carbide Deburring \/ Chamfering End mill - Universal Conical Shape 90°","description":"\u003cp\u003e\u003cspan\u003ePFERD TOOLS solid carbide end mills for deburring and chamfering. The solid carbide end mills are suitable for universal use in a variety of materials.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWeldon shank HB in accordance with DIN 6535 with lateral driving surface.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UD4-M060A90°-HB AL40","offer_id":52880014147873,"sku":"23000120","price":1016.26,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UD5-M080A90°-HB AL40","offer_id":52880014180641,"sku":"23000121","price":1478.79,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UD6-M100A90°-HB AL40","offer_id":52880014213409,"sku":"23000122","price":1946.03,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UD6-M120A90°-HB AL40","offer_id":52880014246177,"sku":"2300123","price":3205.97,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-ud4-m060a90-hb-al40-rgb.png?v=1782134720"},{"product_id":"pferd-solid-carbide-end-mill-ball-nose-shape","title":"PFERD Solid Carbide End mill - Universal Ball nose Shape","description":"\u003cp\u003ePFERD solid tungsten carbide end mills are suitable for universal use on a variety of materials. Mills for various applications, from roughing through to finishing. The chamfer design is also suitable for ramping. Smooth straight shank HA in accordance with DIN 6535.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e- Design with neck chip channel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UB2-M030R-S54HA6 AL40","offer_id":52880021946657,"sku":"23000100","price":1047.19,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UB2-M040R-S54HA6 AL40","offer_id":52880021979425,"sku":"23000101","price":1047.19,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UB2-M050R-S54HA6 AL40","offer_id":52880022012193,"sku":"23000102","price":1047.19,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UB2-M060R-S54HA6 AL40","offer_id":52880022044961,"sku":"23000103","price":1047.19,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UB2-M080R-S58HA6 AL40","offer_id":52880022077729,"sku":"23000104","price":1550.26,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UB2-M100R-S66HA6 AL40","offer_id":52880022110497,"sku":"23000105","price":2230.71,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UB2-M120R-S73HA6 AL40","offer_id":52880022143265,"sku":"23000106","price":3170.95,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UB2-M160R-S82HA6 AL40","offer_id":52880022176033,"sku":"23000107","price":5988.74,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-ub2-m030r-s54ha6-al40-rgb.png?v=1782135675"},{"product_id":"pferd-solid-carbide-drill-universal-type-3xd-sizes-3-4mm","title":"PFERD Solid Carbide Drill - Universal type 3xD - Size 3-4mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-3D-M03.000-14IC LA40","offer_id":52886419341601,"sku":"23000494","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M03.100-14IC LA40","offer_id":52886419374369,"sku":"23000495","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M03.300-14IC LA40","offer_id":52886419407137,"sku":"23000497","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M03.500-14IC LA40","offer_id":52886419439905,"sku":"23000499","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M03.800-17IC LA40","offer_id":52886419472673,"sku":"23000502","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M04.000-17IC LA40","offer_id":52886419505441,"sku":"23000504","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M04.200-17IC LA40","offer_id":52886419538209,"sku":"23000506","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M04.500-17IC LA40","offer_id":52886419570977,"sku":"23000509","price":1092.96,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-3d-m03-000-14ic-la40-rgb.png?v=1782211273"},{"product_id":"pferd-solid-carbide-drill-universal-type-3xd-size-5-6mm","title":"PFERD Solid Carbide Drill - Universal type 3xD - Size 5-6mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-3D-M05.000-20IC LA40","offer_id":52887325245729,"sku":"23000514","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M05.500-20IC LA40","offer_id":52887325278497,"sku":"23000519","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M06.000-20IC LA40","offer_id":52887325311265,"sku":"23000524","price":1092.96,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M06.500-24IC LA40","offer_id":52887325344033,"sku":"23000528","price":1619.2,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M06.800-24IC LA40","offer_id":52887325376801,"sku":"23000531","price":1619.2,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-3d-m05-000-20ic-la40-rgb.png?v=1782211953"},{"product_id":"pferd-solid-carbide-drill-universal-type-3xd-size-7-8mm","title":"PFERD Solid Carbide Drill - Universal type 3xD - Size 7-8mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-3D-M07.000-24IC LA40","offer_id":52887609639201,"sku":"23000533","price":1619.2,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M07.200-29IC LA40","offer_id":52887609671969,"sku":"23000534","price":1619.2,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M07.500-29IC LA40","offer_id":52887609704737,"sku":"23000537","price":1619.2,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M08.000-29IC LA40","offer_id":52887609737505,"sku":"23000542","price":1619.2,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M08.300-35IC LA40","offer_id":52887609770273,"sku":"23000545","price":2377.63,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M08.500-35IC LA40","offer_id":52887623401761,"sku":"23000547","price":2377.63,"currency_code":"ZAR","in_stock":false},{"title":"SCD-U-3D-M08.800-35IC LA40","offer_id":52887623434529,"sku":"23000550","price":2377.63,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-3d-m07-000-24ic-la40-rgb.png?v=1782212889"},{"product_id":"pferd-solid-carbide-drill-universal-type-3xd-size-9-10mm","title":"PFERD Solid Carbide Drill - Universal type 3xD - Size 9-10mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-3D-M09.000-35IC LA40","offer_id":52887640539425,"sku":"23000551","price":2377.63,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M09.500-35IC LA40","offer_id":52887640572193,"sku":"23000555","price":2377.63,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M10.000-35IC LA40","offer_id":52887640604961,"sku":"23000559","price":2377.63,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M10.200-40IC LA40","offer_id":52887640637729,"sku":"23000561","price":3580.58,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M10.500-40IC LA40","offer_id":52887640670497,"sku":"23000564","price":3580.58,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-3d-m09-000-35ic-la40-rgb.png?v=1782215902"},{"product_id":"pferd-solid-carbide-drill-universal-type-3xd-size-11-12mm","title":"PFERD Solid Carbide Drill - Universal type 3xD - Size 11-12mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-3D-M11.000-40IC LA40","offer_id":52887706435873,"sku":"23000566","price":3580.58,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M11.500-40IC LA40","offer_id":52887706468641,"sku":"23000569","price":3580.58,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M12.000-40IC LA40","offer_id":52887706501409,"sku":"23000572","price":3580.58,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M12.500-43IC LA40","offer_id":52887706534177,"sku":"23000575","price":5039.36,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-3d-m11-000-40ic-la40-rgb.png?v=1782216906"},{"product_id":"pferd-solid-carbide-drill-universal-type-3xd-size-13-14mm","title":"PFERD Solid Carbide Drill - Universal type 3xD - Size 13-14mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-3D-M13.000-43IC LA40","offer_id":52887735501089,"sku":"23000578","price":5039.36,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M14.000-43IC LA40","offer_id":52887735533857,"sku":"23000581","price":5039.36,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-3d-m13-000-43ic-la40-rgb.png?v=1782217484"},{"product_id":"pferd-solid-carbide-drill-universal-type-3xd-size-15-16mm","title":"PFERD Solid Carbide Drill - Universal type 3xD - Size 15-16mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-3D-M15.000-45IC LA40","offer_id":52887777018145,"sku":"23000586","price":6878.84,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-3D-M16.000-45IC LA40","offer_id":52887777050913,"sku":"23000591","price":6878.84,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-3d-m15-000-45ic-la40-rgb.png?v=1782217875"},{"product_id":"pferd-solid-carbide-drill-universal-type-5xd-size-3-4mm","title":"PFERD Solid Carbide Drill - Universal type 5xD - Size 3-4mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-5D-M03.000-23IC LA40","offer_id":52887854711073,"sku":"23000592","price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M03.100-23IC LA40","offer_id":52887854743841,"sku":"23000593","price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M03.300-23IC LA40","offer_id":52887854776609,"sku":"23000595","price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M03.500-23IC LA40","offer_id":52887854809377,"sku":"23000597","price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M03.800-29IC LA40","offer_id":52887854842145,"sku":"23000600","price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M04.000-29IC LA40","offer_id":52887854874913,"sku":"23000602","price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M04.200-29IC LA40","offer_id":52887854907681,"sku":"23000604","price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M04.500-29IC LA40","offer_id":52887854940449,"sku":"23000607","price":1583.44,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-5d-m03-000-23ic-la40-rgb.png?v=1782218879"},{"product_id":"pferd-solid-carbide-drill-universal-type-5xd-size-5-6mm","title":"PFERD Solid Carbide Drill - Universal type 5xD - Size 5-6mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-5D-M05.000-35IC LA40","offer_id":52887865622817,"sku":null,"price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M05.500-35IC LA40","offer_id":52887865655585,"sku":null,"price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M06.000-35IC LA40","offer_id":52887865688353,"sku":null,"price":1583.44,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M06.100-43IC LA40","offer_id":52887865721121,"sku":null,"price":2182.59,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M06.500-43IC LA40","offer_id":52887865753889,"sku":null,"price":2182.59,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M06.800-43IC LA40","offer_id":52887870341409,"sku":null,"price":2182.59,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-5d-m05-000-35ic-la40-rgb.png?v=1782219715"},{"product_id":"pferd-solid-carbide-drill-universal-type-5xd-size-7-8mm","title":"PFERD Solid Carbide Drill - Universal type 5xD - Size 7-8mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-5D-M07.000-43IC LA40","offer_id":52887894458657,"sku":"23000632","price":2182.59,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M07.200-43IC LA40","offer_id":52887894491425,"sku":"23000633","price":2182.59,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M07.500-43IC LA40","offer_id":52887894524193,"sku":"23000636","price":2182.59,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M08.000-43IC LA40","offer_id":52887894556961,"sku":"23000641","price":2182.59,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M08.500-49IC LA40","offer_id":52887894622497,"sku":"23000646","price":3225.98,"currency_code":"ZAR","in_stock":false},{"title":"SCD-U-5D-M08.800-49IC LA40","offer_id":52887894655265,"sku":"23000649","price":3225.98,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-5d-m07-000-43ic-la40-rgb.png?v=1782220760"},{"product_id":"pferd-solid-carbide-drill-universal-type-5xd-size-9-10mm","title":"PFERD Solid Carbide Drill - Universal type 5xD - Size 9-10mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-5D-M09.000-49IC LA40","offer_id":52887909990689,"sku":"23000650","price":3225.98,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M09.500-49IC LA40","offer_id":52887910023457,"sku":"23000654","price":3225.98,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M10.000-49IC LA40","offer_id":52887910056225,"sku":"23000658","price":3225.98,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M10.200-56IC LA40","offer_id":52887910088993,"sku":"23000660","price":4957.71,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M10.500-56IC LA40","offer_id":52887910121761,"sku":"23000663","price":4957.71,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M10.800-56IC LA40","offer_id":52887912153377,"sku":"23000664","price":4957.71,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-5d-m09-000-49ic-la40-rgb.png?v=1782221220"},{"product_id":"pferd-solid-carbide-drill-universal-type-5xd-size-11-12mm","title":"PFERD Solid Carbide Drill - Universal type 5xD - Size 11-12mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-5D-M11.000-56IC LA40","offer_id":52887917035809,"sku":"23000665","price":4957.71,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M11.500-56IC LA40","offer_id":52887917068577,"sku":"23000668","price":4957.71,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M12.000-56IC LA40","offer_id":52887917101345,"sku":"23000671","price":4957.71,"currency_code":"ZAR","in_stock":true},{"title":"SCD-U-5D-M12.500-60IC LA40","offer_id":52887917134113,"sku":"23000674","price":6850.03,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-5d-m11-000-56ic-la40-rgb.png?v=1782221568"},{"product_id":"pferd-solid-carbide-drill-universal-type-5xd-size-13mm","title":"PFERD Solid Carbide Drill - Universal type 5xD - Size 13mm","description":"\u003cp\u003ePFERD solid carbide drills are suitable for universal use on a variety of materials. Drill for universal use on a variety of materials. Smooth straight shank HA in accordance with DIN 6535. With inner coolant supply.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"pg-aggregate__list list list--icon-check\"\u003e\n\u003cli\u003eUniversal use on the most important materials.\u003c\/li\u003e\n\u003cli\u003eDouble margin flute for increased process stability and high-quality bores.\u003c\/li\u003e\n\u003cli\u003eOptimised surface finishing for high performance.\u003c\/li\u003e\n\u003cli\u003eState-of-the-art coatings.\u003c\/li\u003e\n\u003cli\u003eInner coolant supply for increased tool life and controlled chip removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCD-U-5D-M13.000-60IC LA40","offer_id":52887922147617,"sku":"23000677","price":6850.03,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scd-u-5d-m13-000-60ic-la40-rgb.png?v=1782221713"}],"url":"https:\/\/pferdza.com\/collections\/universal-cylindrical-end-mill-with-centre-cut-uc.oembed?page=2","provider":"PFERD South Africa","version":"1.0","type":"link"}