{"title":"Consumables","description":"","products":[{"product_id":"pferd-chain-saw-files-2pc-pack-4-0mm-x-200mm","title":"PFERD Chain Saw Files 4.0mm x 200mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n PFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \\n \\n Advantages:\\n - Flexible use on-site due to compact design.\\n - Optimum Combination of tool life and stock removal.\\n - Aggressive filing for quick sharpening.\\n - Supplied in a reusable plastic pouch.\\n - Suitable for a variety of manual filing systems. \\n - Precise and consistent diameter throughout the length of the file.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - 4,0mm Diameter x 200mm Length (5\/32)\\n - Chain Pitch: 3\/8 ( Low Profile )\\n \\n Operating instruction:\\n Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Flexible use on-site due to compact design.\u003cbr data-mce-fragment=\"1\"\u003e - Optimum Combination of tool life and stock removal.\u003cbr data-mce-fragment=\"1\"\u003e - Aggressive filing for quick sharpening.\u003cbr data-mce-fragment=\"1\"\u003e - Supplied in a reusable plastic pouch.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of manual filing systems. \u003cbr data-mce-fragment=\"1\"\u003e - Precise and consistent diameter throughout the length of the file.\u003cbr data-mce-fragment=\"1\"\u003e - Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - 4,0mm Diameter x 200mm Length (5\/32)\u003cbr data-mce-fragment=\"1\"\u003e - Chain Pitch: 3\/8 ( Low Profile )\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"1 Pc","offer_id":51560499413281,"sku":"11016203","price":38.47,"currency_code":"ZAR","in_stock":true},{"title":"2 Pcs","offer_id":51560499446049,"sku":"11081203","price":76.94,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/412-4x3-200-x-4-0-classic-rgb.png?v=1754462758"},{"product_id":"pferd-chain-saw-files-2pc-pack-4-8mm-x-200mm","title":"PFERD Chain Saw Files 4.8mm x 200mm","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n PFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \\n \\n Advantages:\\n - Flexible use on-site due to compact design.\\n - Optimum Combination of tool life and stock removal.\\n - Aggressive filing for quick sharpening.\\n - Supplied in a reusable plastic pouch.\\n - Suitable for a variety of manual filing systems. \\n - Precise and consistent diameter throughout the length of the file.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - 4,8mm Diameter x 200mm Length (3\/16)\\n - Chain Pitch: .325\\n \\n Operating instruction:\\n Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages\u003c\/span\u003e:\u003cbr data-mce-fragment=\"1\"\u003e- Flexible use on-site due to compact design.\u003cbr data-mce-fragment=\"1\"\u003e- Optimum Combination of tool life and stock removal.\u003cbr data-mce-fragment=\"1\"\u003e- Aggressive filing for quick sharpening.\u003cbr data-mce-fragment=\"1\"\u003e- Supplied in a reusable plastic pouch.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of manual filing systems. \u003cbr data-mce-fragment=\"1\"\u003e- Precise and consistent diameter throughout the length of the file.\u003cbr data-mce-fragment=\"1\"\u003e- Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- 4,8mm Diameter x 200mm Length (3\/16)\u003cbr data-mce-fragment=\"1\"\u003e- Chain Pitch: .325\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eEnsure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"1 Pc","offer_id":51560572551457,"sku":"11018203","price":38.47,"currency_code":"ZAR","in_stock":true},{"title":"2 Pcs","offer_id":51560572518689,"sku":"11083203","price":76.94,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/412-4x3-200-x-4-0-classic-rgb.png?v=1754462758"},{"product_id":"pferd-chain-saw-files-2pc-pack-5-16mm-x-200mm","title":"PFERD Chain Saw Files 5.16mm x 200mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n PFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \\n \\n Advantages:\\n - Flexible use on-site due to compact design.\\n - Optimum Combination of tool life and stock removal.\\n - Aggressive filing for quick sharpening.\\n - Supplied in a reusable plastic pouch.\\n - Suitable for a variety of manual filing systems. \\n - Precise and consistent diameter throughout the length of the file.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - 5,16mm Diameter x 200mm Length (13\/64)\\n - Chain Pitch: 3\/8 \\n \\n Operating instruction:\\n Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages\u003c\/span\u003e:\u003cbr data-mce-fragment=\"1\"\u003e - Flexible use on-site due to compact design.\u003cbr data-mce-fragment=\"1\"\u003e - Optimum Combination of tool life and stock removal.\u003cbr data-mce-fragment=\"1\"\u003e - Aggressive filing for quick sharpening.\u003cbr data-mce-fragment=\"1\"\u003e - Supplied in a reusable plastic pouch.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of manual filing systems. \u003cbr data-mce-fragment=\"1\"\u003e - Precise and consistent diameter throughout the length of the file.\u003cbr data-mce-fragment=\"1\"\u003e - Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - 5,16mm Diameter x 200mm Length (13\/64)\u003cbr data-mce-fragment=\"1\"\u003e - Chain Pitch: 3\/8 \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"1 Pc","offer_id":51560660336929,"sku":"11020203","price":38.47,"currency_code":"ZAR","in_stock":true},{"title":"2 Pcs","offer_id":51560660304161,"sku":"18600757","price":76.94,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/412-4x3-200-x-4-0-classic-rgb.png?v=1754462758"},{"product_id":"pferd-chain-saw-files-2pc-pack-5-5mm-x-200mm","title":"PFERD Chain Saw Files 5.5mm x 200mm","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n PFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \\n \\n Advantages:\\n - Flexible use on-site due to compact design.\\n - Optimum Combination of tool life and stock removal.\\n - Aggressive filing for quick sharpening.\\n - Supplied in a reusable plastic pouch.\\n - Suitable for a variety of manual filing systems. \\n - Precise and consistent diameter throughout the length of the file.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - 5,5mm Diameter x 200mm Length (7\/32)\\n - Chain Pitch: .404\\n \\n Operating instruction:\\n Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain Saw Files from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Chain Saw Files offer a precise spiral cut for outstanding sharpness and prolonged service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Flexible use on-site due to compact design.\u003cbr data-mce-fragment=\"1\"\u003e - Optimum Combination of tool life and stock removal.\u003cbr data-mce-fragment=\"1\"\u003e - Aggressive filing for quick sharpening.\u003cbr data-mce-fragment=\"1\"\u003e - Supplied in a reusable plastic pouch.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of manual filing systems. \u003cbr data-mce-fragment=\"1\"\u003e - Precise and consistent diameter throughout the length of the file.\u003cbr data-mce-fragment=\"1\"\u003e - Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - 5,5mm Diameter x 200mm Length (7\/32)\u003cbr data-mce-fragment=\"1\"\u003e - Chain Pitch: .404\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"1 Pc","offer_id":51560701559073,"sku":"11022203","price":38.47,"currency_code":"ZAR","in_stock":true},{"title":"2 Pcs","offer_id":51560701526305,"sku":"11085203","price":76.94,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/412-4x3-200-x-4-0-classic-rgb.png?v=1754462758"},{"product_id":"pferd-chain-sharp-chain-saw-sharpener-cs-x-4-0","title":"PFERD CHAIN SHARP chain saw sharpener CS-X-4.0","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n The CHAIN SHARP CS-X chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \\n \\n Advantages:\\n - Flexible use on-site due to compact device design\\n - Simultaneous sharpening of saw teeth and depth gauge adjustment\\n - Easy to use due to defined sharpening angles\\n - Long operating life due to interchangeable files\\n - Precise and uniform sharpening results, even for inexperienced users\\n - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - Suitable for chain saw file diameter: 4mm or 5\/32\\n - Chain Pitch: 3\/8 ( Low Profile )\\n - Depth Gauge Distance: 0.65mm\\n \\n Operating instruction:\\n \\n For further operating instructions or product information, please visit www.pferd.com or our Youtube channel. (August Rüggeberg PFERD-Werkzeuge)\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The \u003cstrong\u003eCHAIN SHARP CS-X\u003c\/strong\u003e chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Flexible use on-site due to compact device design\u003cbr data-mce-fragment=\"1\"\u003e - Simultaneous sharpening of saw teeth and depth gauge adjustment\u003cbr data-mce-fragment=\"1\"\u003e - Easy to use due to defined sharpening angles\u003cbr data-mce-fragment=\"1\"\u003e - Long operating life due to interchangeable files\u003cbr data-mce-fragment=\"1\"\u003e - Precise and uniform sharpening results, even for inexperienced users\u003cbr data-mce-fragment=\"1\"\u003e - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\u003cbr data-mce-fragment=\"1\"\u003e - Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for chain saw file diameter: 4mm or 5\/32\u003cbr data-mce-fragment=\"1\"\u003e - Chain Pitch: 3\/8 ( Low Profile )\u003cbr data-mce-fragment=\"1\"\u003e - Depth Gauge Distance: 0.65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eEnsure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003cbr\u003e\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262218490145,"sku":"11098040","price":941.91,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220835913-cs-x-4-0-rgb-Prim.jpg?v=1736754295"},{"product_id":"pferd-chain-sharp-chain-saw-sharpener-cs-x-4-8","title":"PFERD CHAIN SHARP chain saw sharpener CS-X-4.8","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n The CHAIN SHARP CS-X chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \\n \\n Advantages:\\n - Flexible use on-site due to compact device design\\n - Simultaneous sharpening of saw teeth and depth gauge adjustment\\n - Easy to use due to defined sharpening angles\\n - Long operating life due to interchangeable files\\n - Precise and uniform sharpening results, even for inexperienced users\\n - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - Suitable for chain saw file diameter: 4,8mm or 3\/16\\n - Chain Pitch: .325\\n - Depth Gauge Distance: 0.65mm\\n \\n Operating instruction:\\n \\n For further operating instructions or product information, please visit www.pferd.com or our Youtube channel. (August Rüggeberg PFERD-Werkzeuge)\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The \u003cstrong\u003eCHAIN SHARP CS-X\u003c\/strong\u003e chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Flexible use on-site due to compact device design\u003cbr data-mce-fragment=\"1\"\u003e - Simultaneous sharpening of saw teeth and depth gauge adjustment\u003cbr data-mce-fragment=\"1\"\u003e - Easy to use due to defined sharpening angles\u003cbr data-mce-fragment=\"1\"\u003e - Long operating life due to interchangeable files\u003cbr data-mce-fragment=\"1\"\u003e - Precise and uniform sharpening results, even for inexperienced users\u003cbr data-mce-fragment=\"1\"\u003e - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\u003cbr data-mce-fragment=\"1\"\u003e - Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for chain saw file diameter: 4,8mm or 3\/16\u003cbr data-mce-fragment=\"1\"\u003e - Chain Pitch: .325\u003cbr data-mce-fragment=\"1\"\u003e - Depth Gauge Distance: 0.65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eEnsure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003cbr\u003e\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262281535777,"sku":"11098048","price":941.91,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220835920-cs-x-4-8-rgb-Prim.jpg?v=1736754294"},{"product_id":"pferd-chain-sharp-chain-saw-sharpener-cs-x-5-5","title":"PFERD CHAIN SHARP chain saw sharpener CS-X- 5.5","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n The CHAIN SHARP CS-X chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \\n \\n Advantages:\\n - Flexible use on-site due to compact device design\\n - Simultaneous sharpening of saw teeth and depth gauge adjustment\\n - Easy to use due to defined sharpening angles\\n - Long operating life due to interchangeable files\\n - Precise and uniform sharpening results, even for inexperienced users\\n - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - Suitable for chain saw file diameter: 5,5mm or 7\/32\\n - Chain Pitch: .404\\n - Depth Gauge Distance: 0.75mm\\n \\n Operating instruction:\\n \\n For further operating instructions or product information, please visit www.pferd.com or our Youtube channel. (August Rüggeberg PFERD-Werkzeuge)\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The \u003cstrong\u003eCHAIN SHARP CS-X\u003c\/strong\u003e chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Flexible use on-site due to compact device design\u003cbr data-mce-fragment=\"1\"\u003e - Simultaneous sharpening of saw teeth and depth gauge adjustment\u003cbr data-mce-fragment=\"1\"\u003e - Easy to use due to defined sharpening angles\u003cbr data-mce-fragment=\"1\"\u003e - Long operating life due to interchangeable files\u003cbr data-mce-fragment=\"1\"\u003e - Precise and uniform sharpening results, even for inexperienced users\u003cbr data-mce-fragment=\"1\"\u003e - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\u003cbr data-mce-fragment=\"1\"\u003e - Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for chain saw file diameter: 5,5mm or 7\/32\u003cbr data-mce-fragment=\"1\"\u003e - Chain Pitch: .404\u003cbr data-mce-fragment=\"1\"\u003e - Depth Gauge Distance: 0.75mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262433055009,"sku":"11098055","price":941.91,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220835944-cs-x-5-5-rgb-Prim.jpg?v=1736754293"},{"product_id":"pferd-chain-sharp-chain-saw-sharpener-cs-x-5-16","title":"PFERD CHAIN SHARP chain saw sharpener CS-X- 5.16","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Chain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \\n \\n The CHAIN SHARP CS-X chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \\n \\n Advantages:\\n - Flexible use on-site due to compact device design\\n - Simultaneous sharpening of saw teeth and depth gauge adjustment\\n - Easy to use due to defined sharpening angles\\n - Long operating life due to interchangeable files\\n - Precise and uniform sharpening results, even for inexperienced users\\n - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\\n - Can be used on steel materials up to 1,200 N\/mm²\\n \\n Specifications:\\n - Suitable for chain saw file diameter: 5,16mm or 13\/64\\n - Chain Pitch: 3\/8\\n - Depth Gauge Distance: 0.65mm\\n \\n Operating instruction:\\n \\n For further operating instructions or product and safety information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003eChain saw sharpeners from PFERD are very well suited for the manual sharpening of saw chains. Manual sharpening is more economic and much gentler than machine-based sharpening, and can prolong the operating life of the saw chain. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The \u003cstrong\u003eCHAIN SHARP CS-X\u003c\/strong\u003e chain saw sharpener stands out due to its excellent file position, ergonomic shape and easy operation. The device provides a sharpening angle of 30° as well as a defined depth gauge distance. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Flexible use on-site due to compact device design\u003cbr data-mce-fragment=\"1\"\u003e - Simultaneous sharpening of saw teeth and depth gauge adjustment\u003cbr data-mce-fragment=\"1\"\u003e - Easy to use due to defined sharpening angles\u003cbr data-mce-fragment=\"1\"\u003e - Long operating life due to interchangeable files\u003cbr data-mce-fragment=\"1\"\u003e - Precise and uniform sharpening results, even for inexperienced users\u003cbr data-mce-fragment=\"1\"\u003e - Easy handling allows operator to turn the device over to change from the right to the left tooth  no conversion work required.\u003cbr data-mce-fragment=\"1\"\u003e - Can be used on steel materials up to 1,200 N\/mm²\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for chain saw file diameter: 5,16mm or 13\/64\u003cbr data-mce-fragment=\"1\"\u003e - Chain Pitch: 3\/8\u003cbr data-mce-fragment=\"1\"\u003e - Depth Gauge Distance: 0.65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eEnsure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003cbr\u003e\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262549643553,"sku":"11098051","price":941.91,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220835937-cs-x-5-16-rgb-Prim.jpg?v=1736754292"},{"product_id":"pferd-hand-files","title":"PFERD Hand File","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€) \\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Consistent stock removal throughout file working area.\u003cbr data-mce-fragment=\"1\"\u003e- Versatile for a range of applications due to application orientated design. \u003cbr data-mce-fragment=\"1\"\u003e- Long Service Life\u003cbr data-mce-fragment=\"1\"\u003e- Can be used with or without handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Rectangular Hand File (1112). Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€)\u003cbr data-mce-fragment=\"1\"\u003e- Cut :\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2\u003c\/li\u003e\n\u003cli\u003e3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€) \\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e- Size : \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€) \\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e150mm x 16mm x 4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€) \\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e200mm x 20mm x 5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€) \\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e250mm x 25mm x 6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€) \\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e- Plastic Handle Included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€) \\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"150mm \/ 1","offer_id":48077560742177,"sku":"11210156","price":132.25,"currency_code":"ZAR","in_stock":true},{"title":"150mm \/ 2","offer_id":48384000131361,"sku":"11210157","price":132.94,"currency_code":"ZAR","in_stock":true},{"title":"150mm \/ 3","offer_id":48841855992097,"sku":"11210158","price":137.94,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 1","offer_id":48077560774945,"sku":"11210206","price":155.71,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 2","offer_id":48384000164129,"sku":"11210207","price":162.38,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 3","offer_id":48841856024865,"sku":"11210208","price":166.23,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 1","offer_id":48077560807713,"sku":"11210256","price":192.8,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 2","offer_id":48384000196897,"sku":"11210257","price":197.11,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 3","offer_id":48841856057633,"sku":"11210258","price":213.56,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/6009642953778-pf-1112-200-h2-ohne-verpackung-za-rgb-Prim.jpg?v=1736754291"},{"product_id":"pferd-half-round-file","title":"PFERD Half-Round File","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Consistent stock removal throughout file working area.\u003cbr data-mce-fragment=\"1\"\u003e- Versatile for a range of applications due to application orientated design. \u003cbr data-mce-fragment=\"1\"\u003e- Long Service Life\u003cbr data-mce-fragment=\"1\"\u003e- Can be used with or without handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Half-Round cut on two sides \u003cem\u003e(1152)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Cut : \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e3\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Sizes : \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e150mm x 16mm x 4.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e200mm x 20mm x 6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e250mm x 25mm x 7mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides\\n - Cut : Second Cut\\n - Size : 200mm x 20mm x 6mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e - Plastic Handle Included. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"150mm \/ 1","offer_id":48023721476385,"sku":"11213156","price":175.32,"currency_code":"ZAR","in_stock":true},{"title":"150mm \/ 2","offer_id":48383491965217,"sku":"11213157","price":179.8,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 1","offer_id":48023721443617,"sku":"11213206","price":203.78,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 2","offer_id":48383491997985,"sku":"11213207","price":209.88,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 1","offer_id":48023721509153,"sku":"11213256","price":264.1,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 2","offer_id":48383492030753,"sku":"11213257","price":271.8,"currency_code":"ZAR","in_stock":true},{"title":"150mm \/ 3","offer_id":48842038870305,"sku":"11213158","price":184.4,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 3","offer_id":48842038903073,"sku":"11213208","price":223.91,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 3","offer_id":48842038935841,"sku":"11213258","price":282.61,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/6009642954799-pf-1152-200-h2-ohne-verpackung-za-rgb-Prim.jpg?v=1736754290"},{"product_id":"pferd-round-file","title":"PFERD Round File","description":"\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Consistent stock removal throughout file working area.\u003cbr data-mce-fragment=\"1\"\u003e- Versatile for a range of applications due to application orientated design. \u003cbr data-mce-fragment=\"1\"\u003e- Long Service Life\u003cbr data-mce-fragment=\"1\"\u003e- Can be used with or without handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003cbr\u003e\u003c\/span\u003e- Shape : Round (1162)\u003cbr data-mce-fragment=\"1\"\u003e- Cut:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e3\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e- Size : \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e150mm x 6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e200mm x 7.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e250mm x 9.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality machinist files and suitable accessories. PFERD machinist files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Suitable for a range of materials and applications including deburring, chamfering, as well as general surface and edge work. \\n \\n Advantages:\\n - Consistent stock removal throughout file working area.\\n - Versatile for a range of applications due to application orientated design. \\n - Long Service Life\\n - Can be used with or without handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round \\n - Cut : Second Cut\\n - Size : 200mm x 7.5mm\\n - Plastic Handle Included. (PFERD - PH 11)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Plastic Handle Included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"PFERD","offers":[{"title":"150mm \/ 1","offer_id":48077500285217,"sku":"11214156","price":124.55,"currency_code":"ZAR","in_stock":true},{"title":"150mm \/ 2","offer_id":48383813943585,"sku":"11214157","price":130.41,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 1","offer_id":48077500317985,"sku":"11214206","price":149.04,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 2","offer_id":48383813976353,"sku":"11214207","price":157.03,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 1","offer_id":48077500350753,"sku":"11214256","price":179.8,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 2","offer_id":48383814009121,"sku":"11214257","price":189.0,"currency_code":"ZAR","in_stock":true},{"title":"150mm \/ 3","offer_id":48841964519713,"sku":"11214158","price":138.52,"currency_code":"ZAR","in_stock":true},{"title":"200mm \/ 3","offer_id":48841964585249,"sku":"11214208","price":160.66,"currency_code":"ZAR","in_stock":true},{"title":"250mm \/ 3","offer_id":48841964618017,"sku":"11214258","price":199.7,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/6009642955116-pf-1162-200-h2-ohne-verpackung-za-rgb-Prim.jpg?v=1736754289"},{"product_id":"pferd-flat-key-file","title":"PFERD Flat Key File","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without a handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular flat file, tapered and cut on all four sides.\\n - Cut : Second\\n - Size : 100mm x 10mm x 1.4mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design especially suited for delicate components. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without a handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Rectangular flat file \u003cem\u003e(1127)\u003c\/em\u003e, tapered and cut on all four sides.\u003cbr data-mce-fragment=\"1\"\u003e - Cut : Second\u003cbr data-mce-fragment=\"1\"\u003e - Size : 100mm x 10mm x 1.4mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"100mm Cut 2","offer_id":50476413321505,"sku":"11501102","price":229.43,"currency_code":"ZAR","in_stock":true},{"title":"150mm Cut 2","offer_id":50476413354273,"sku":"11501152","price":438.21,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220365038-1127-100-h2-rgb-Secon-1.jpg?v=1736754288"},{"product_id":"pferd-hand-key-file","title":"PFERD Hand Key File","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without a handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€)\\n - Cut : Second\\n - Size : 100mm x 10mm x 1.4mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Small Handy Design especially suited for delicate components. \u003cbr data-mce-fragment=\"1\"\u003e- Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e- Can be used with or without a handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eSpecifications:\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-style=\"text-decoration: underline;\"\u003e- Shape : Rectangular Hand File (1117). Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€)\u003cbr\u003e- Cut : Second\u003cbr\u003e- Size :\u003cbr\u003e100mm x 10mm x 1.4mm\u003cbr\u003e150mm x 16mm x 1.8mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without a handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Rectangular Hand File. Cutting edge on three sides of the file with one uncut edge. (€œsafe-edge€)\\n - Cut : Second\\n - Size : 100mm x 10mm x 1.4mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"100mm Cut 2","offer_id":50476398608673,"sku":"11502102","price":244.2,"currency_code":"ZAR","in_stock":true},{"title":"150mm Cut 2","offer_id":50476398641441,"sku":"11502152","price":421.53,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220365052-1117-100-h2-rgb-Secon-1.jpg?v=1736754287"},{"product_id":"pferd-half-round-key-file-100m-cut-2","title":"PFERD Half Round Key File 100m Cut 2","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without a handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Half-Round cut on two sides.\\n - Cut : Second\\n - Size : 100mm x 9mm x 3mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design especially suited for delicate components. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without a handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Half-Round cut on two sides. \u003cem\u003e(1157)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Cut : Second\u003cbr data-mce-fragment=\"1\"\u003e - Size : 100mm x 9mm x 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262841540897,"sku":"11503102","price":297.16,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220365076-1157-100-h2-rgb-Secon-1.jpg?v=1736754286"},{"product_id":"pferd-round-key-file-100m-cut-2","title":"PFERD Round Key File 100m Cut 2","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without a handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Round\\n - Cut : Second\\n - Size : 100mm x 3mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design especially suited for delicate components. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without a handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round \u003cem\u003e(1167)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Cut : Second\u003cbr data-mce-fragment=\"1\"\u003e - Size : 100mm x 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262874734881,"sku":"11504102","price":238.45,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220365083-1167-100-h2-rgb-Secon-1.jpg?v=1736754285"},{"product_id":"pferd-three-square-key-file-100m-cut-2","title":"PFERD Three Square Key File 100m Cut 2","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without a handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Triangular file, tapered and cut on three sides. \\n - Cut : Second\\n - Size : 100mm x 5mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design especially suited for delicate components. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without a handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Triangular file \u003cem\u003e(1137)\u003c\/em\u003e, tapered and cut on three sides. \u003cbr data-mce-fragment=\"1\"\u003e - Cut : Second\u003cbr data-mce-fragment=\"1\"\u003e - Size : 100mm x 5mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262904095009,"sku":"11505102","price":273.87,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220365090-1137-100-h2-rgb-Secon-1.jpg?v=1736754284"},{"product_id":"pferd-square-key-file-100m-cut-2","title":"PFERD Square Key File 100m Cut 2","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without a handle thanks to the forged tang.\\n \\n Specifications:\\n - Shape : Square file, tapered and cut on four sides. \\n - Cut : Second\\n - Size : 100mm x 3mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design especially suited for delicate components. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without a handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Square file \u003cem\u003e(1147)\u003c\/em\u003e, tapered and cut on four sides. \u003cbr data-mce-fragment=\"1\"\u003e - Cut : Second\u003cbr data-mce-fragment=\"1\"\u003e - Size : 100mm x 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262948823329,"sku":"11506102","price":262.2,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220365106-1147-100-h2-rgb-Secon-1.jpg?v=1736754284"},{"product_id":"pferd-6pc-100mm-key-file-set","title":"PFERD 6pc 100mm Key File Set","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The PFERD Key File Set \u003cem\u003e(265A) \u003c\/em\u003econtains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The set includes the following :\u003cbr data-mce-fragment=\"1\"\u003e - Six Key Files : 100mm length in a medium 2nd Cut. \u003cbr data-mce-fragment=\"1\"\u003e - Set consist of one file of each in the following shapes and sizes:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eFlat (100mm x 10mm x 1.4mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eHand (100mm x 10mm x 1.4mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eThree Square (100mm x 5mm x 5mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eHalf-Round (100mm x 9mm x 3mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eSquare (100mm x 3mm x 3mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eRound (100mm x 3mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Key File Set contains a selection of application orientated PFERD Key Files including an interchangeable quick mounting handle. The set is supplied in a handy plastic pouch to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Key Files : 100mm length in a medium 2nd Cut. \\n - Set consist of one file of each in the following shapes and sizes:\\n €¢ Flat (100mm x 10mm x 1.4mm)\\n €¢ Hand (100mm x 10mm x 1.4mm)\\n €¢ Three Square (100mm x 5mm x 5mm)\\n €¢ Half-Round (100mm x 9mm x 3mm)\\n €¢ Square (100mm x 3mm x 3mm)\\n €¢ Round (100mm x 3mm)\\n  \\n Advantages:\\n - Small Handy Design especially suited for delicate components. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design especially suited for delicate components. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262961275169,"sku":"11702100","price":1774.28,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220011386-265-a-100-h2-rgb-Prim.jpg?v=1736754283"},{"product_id":"pferd-hand-needle-file-160m-cut-1","title":"PFERD Hand Needle File 160m Cut 1","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Rectangular Hand file cut on four sides. \\n - Cut : First\\n - Size : 160mm x 5.5mm x 1.4mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design.\u003cbr data-mce-fragment=\"1\"\u003e - Ideally suited for work on small and delicate workpieces. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without handle thanks to the forged tang. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Rectangular Hand file cut on four sides. (2401)\u003cbr data-mce-fragment=\"1\"\u003e - Cut : First\u003cbr data-mce-fragment=\"1\"\u003e - Size : 160mm x 5.5mm x 1.4mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262969139489,"sku":"12501082","price":222.76,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220366875-2401-160-h1-rgb-Prim.jpg?v=1736754282"},{"product_id":"pferd-flat-needle-file-160m-cut-1","title":"PFERD Flat Needle File 160m Cut 1","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Rectangular flat file, tapered and cut on all four sides. \\n - Cut : First\\n - Size : 160mm x 5.5mm x 1.4mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design.\u003cbr data-mce-fragment=\"1\"\u003e - Ideally suited for work on small and delicate workpieces. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without handle thanks to the forged tang. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Rectangular flat file, tapered and cut on all four sides. (2406)\u003cbr data-mce-fragment=\"1\"\u003e - Cut : First\u003cbr data-mce-fragment=\"1\"\u003e - Size : 160mm x 5.5mm x 1.4mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46262976381217,"sku":"12505082","price":239.32,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220367278-2406-160-h1-rgb-Prim.jpg?v=1736754281"},{"product_id":"pferd-three-square-needle-file-160m-cut-1","title":"PFERD Three Square Needle File","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Triangular file, tapered and cut on three sides. \\n - Cut : First\\n - Size : 160mm x 3.7mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Small Handy Design.\u003cbr data-mce-fragment=\"1\"\u003e- Ideally suited for work on small and delicate workpieces. \u003cbr data-mce-fragment=\"1\"\u003e- Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e- Can be used with or without handle thanks to the forged tang.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Triangular file, tapered and cut on three sides. \\n - Cut : First\\n - Size : 160mm x 3.7mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eSpecifications:\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-style=\"text-decoration: underline;\"\u003e- Shape : Triangular file, tapered and cut on three sides. (2407)\u003cbr\u003e- Cut :\u003cbr\u003e    Zero\u003cbr\u003e    First\u003cbr\u003e- Size :\u003cbr\u003e    140mm x 3.5mm\u003cbr\u003e    160mm x 3.7mm\u003cbr\u003e    180mm x 4.1mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Triangular file, tapered and cut on three sides. \\n - Cut : First\\n - Size : 160mm x 3.7mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"140 Cut 1","offer_id":50478593179937,"sku":"12508062","price":217.64,"currency_code":"ZAR","in_stock":true},{"title":"160m Cut 1","offer_id":50478593212705,"sku":"12508082","price":238.05,"currency_code":"ZAR","in_stock":true},{"title":"180 Cut 0","offer_id":50478593245473,"sku":"12508092","price":272.21,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220367490-2407-160-h1-rgb-Prim.jpg?v=1736754280"},{"product_id":"pferd-half-round-needle-file-160m-cut-1","title":"PFERD Half-Round Needle File 160m Cut 1","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Half-Round File cut on two sides. \\n - Cut : First\\n - Size : 160mm x 5.7mm x 1.8mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design.\u003cbr data-mce-fragment=\"1\"\u003e - Ideally suited for work on small and delicate workpieces. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without handle thanks to the forged tang. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Half-Round File cut on two sides. (2402)\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Half-Round File cut on two sides. \\n - Cut : First\\n - Size : 160mm x 5.7mm x 1.8mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Cut : First\u003cbr data-mce-fragment=\"1\"\u003e - Size : 160mm x 5.7mm x 1.8mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46263020880161,"sku":"12509082","price":255.93,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220367650-2402-160-h1-rgb-Prim.jpg?v=1736754279"},{"product_id":"pferd-square-needle-file-160m-cut-1","title":"PFERD Square Needle File 160m Cut 1","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Square file, tapered and cut on four sides. \\n - Cut : First\\n - Size : 160mm x 2.5mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design.\u003cbr data-mce-fragment=\"1\"\u003e - Ideally suited for work on small and delicate workpieces. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without handle thanks to the forged tang. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Square file, tapered and cut on four sides. (2408)\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Square file, tapered and cut on four sides. \\n - Cut : First\\n - Size : 160mm x 2.5mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Cut : First\u003cbr data-mce-fragment=\"1\"\u003e - Size : 160mm x 2.5mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46297858277665,"sku":"12511082","price":238.05,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220367834-2408-160-h1-rgb-Prim.jpg?v=1736754278"},{"product_id":"pferd-round-needle-file-160m-cut-1","title":"PFERD Round Needle File 160m Cut 1","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n Advantages:\\n - Small Handy Design.\\n - Ideally suited for work on small and delicate workpieces. \\n - Versatile for a range of applications. \\n - Can be used with or without handle thanks to the forged tang. \\n \\n Specifications:\\n - Shape : Round tapered file. \\n - Cut : First\\n - Size : 160mm x 3.25mm\\n - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design.\u003cbr data-mce-fragment=\"1\"\u003e - Ideally suited for work on small and delicate workpieces. \u003cbr data-mce-fragment=\"1\"\u003e - Versatile for a range of applications. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without handle thanks to the forged tang. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round tapered file. (2410)\u003cbr data-mce-fragment=\"1\"\u003e - Cut : First\u003cbr data-mce-fragment=\"1\"\u003e - Size : 160mm x 3.25mm\u003cbr data-mce-fragment=\"1\"\u003e - Supplied without a handle. PFERD quick changing handle to be purchased separately if required.(SH 220)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46297870270753,"sku":"12512082","price":222.76,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220367988-2410-160-h1-rgb-Prim.jpg?v=1736754277"},{"product_id":"pferd-6pc-needle-file-set","title":"PFERD 6pc Needle File Set","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The PFERD Needle File set (\u003cem\u003ePF 263 160 H1\u003c\/em\u003e) contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The set includes the following :\u003cbr data-mce-fragment=\"1\"\u003e - Six Needle Files : 160mm length in a Swiss Cut 1 \u003cbr data-mce-fragment=\"1\"\u003e - Set consist of one file of each in the following shapes:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eFlat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eHand\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eThree Square\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eHalf-Round\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eSquare\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003eRound\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD Needle File set contains a selection of application orientated PFERD Needle Files supplied in a handy box to protect the files against dirt and damage. \\n \\n The set includes the following :\\n - Six Needle Files : 160mm length in a Swiss Cut 1 \\n - Set consist of one file of each in the following shapes:\\n €¢ Flat\\n €¢ Hand\\n €¢ Three Square\\n €¢ Half-Round\\n €¢ Square\\n €¢ Round\\n  \\n Advantages:\\n - Small Handy Design. \\n - Ideally suited for work on small and delicate workpieces. \\n - Can be used with or without handle thanks to the forged tang.\\n \\n Operating instruction:\\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Small Handy Design. \u003cbr data-mce-fragment=\"1\"\u003e - Ideally suited for work on small and delicate workpieces. \u003cbr data-mce-fragment=\"1\"\u003e - Can be used with or without handle thanks to the forged tang.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46297879216417,"sku":"11260162","price":2246.93,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220009222-pf-263-160-h1-rgb-Prim.jpg?v=1736754277"},{"product_id":"pferd-quick-mounting-precision-file-handle-sh220","title":"PFERD Quick Mounting Precision File Handle SH220","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\\n \\n The PFERD SH 220 quick mounting file handle is suitable for needle files, diamond needle files and other precision files. It is suitable for file lengths 140mm, 160mm, 180mm and 200mm and tang diameters of 3.0 ; 3.25; 3.5 and 3.75mm. \\n \\n Advantages:\\n \\n - Quick and easy tool changes. \\n - Handy and Light Weight.\\n - Allows for good force transmission and control of the precision file.\\n - Reusable.\\n - Ergonomic Design\\n \\n Specifications:\\n - Overall Length : 90mm\\n - Weight : 30g\\n  \\n Operating instruction:\\n \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD offers a range of high quality precision files and suitable accessories. PFERD precision files meet the highest requirements with regards to geometric accuracy, cutting performance and service life. Precision files are used in jig and tool construction especially tool and die manufacturing.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The PFERD SH 220 quick mounting file handle is suitable for needle files, diamond needle files and other precision files. It is suitable for file lengths 140mm, 160mm, 180mm and 200mm and tang diameters of 3.0 ; 3.25; 3.5 and 3.75mm. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Quick and easy tool changes. \u003cbr data-mce-fragment=\"1\"\u003e - Handy and Light Weight.\u003cbr data-mce-fragment=\"1\"\u003e - Allows for good force transmission and control of the precision file.\u003cbr data-mce-fragment=\"1\"\u003e - Reusable.\u003cbr data-mce-fragment=\"1\"\u003e - Ergonomic Design\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 90mm\u003cbr data-mce-fragment=\"1\"\u003e - Weight : 30g\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating instruction:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46297928073505,"sku":"12605004","price":270.83,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220368251-sh-220-rgb-Prim.jpg?v=1736754276"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-cylindrical-shape-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Cylindrical Shape 06mm x 16mm x 6mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e Specifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with End Cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46298112426273,"sku":"21001000","price":604.27,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220092866-zyas-0616-6-allround-rgb-Prim_7ed53a87-b24d-48cf-8e2a-c6c69646b709.jpg?v=1736754274"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-cylindrical-shape-with-radius-end-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Cylindrical Shape with radius end 06mm x 16mm x 6mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with radius end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with radius end (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with radius end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299063943457,"sku":"21001010","price":614.22,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220093153-wrc-0616-6-allround-rgb-Prim_b868bed5-15f0-4580-83d8-3255807e1f10.jpg?v=1736754273"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-round-tree-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Round Tree 06mm x 18mm x 6mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. round tree shape head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 18mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. round tree shape head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299114570017,"sku":"21001029","price":610.25,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220093580-rbf-0618-6-allround-rgb-Prim_408e9cad-5669-4529-81d4-3daa806a6ed4.jpg?v=1736754273"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr MICRO cut Cylindrical Shape 06mm x 16mm x 6mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with end cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299157496097,"sku":"21100276","price":748.31,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220895566-zyas-0616-6-micro-rgb-Prim_87ad08b4-6d06-4b9e-94d8-fd939d969684.jpg?v=1736754272"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-with-radius-end-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr MICRO cut Cylindrical Shape with radius end, 06mm x 16mm x 6mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299262026017,"sku":"21105076","price":838.52,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220869017-wrc-0616-6-micro-rgb-Prim_cb4296cb-679d-4c49-90e9-2ffcd0639bd0.jpg?v=1736754271"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-tree-shape-with-radius-end-06mm-x-18mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr MICRO cut Tree Shape with radius end 06mm x 18mm x 6mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round Tree shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 18mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299307671841,"sku":"21157205","price":742.27,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220835494-rbf-0618-6-micro-rgb-Prim_8715a190-35d4-4022-b143-99f8ecb38ad3.jpg?v=1736754270"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-cylindrical-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Cylindrical Shape 03mm x 13mm x 3mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with end cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299523645729,"sku":"21200283","price":365.99,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220049501-zyas-0313-3-z3-plus-rgb-Prim_bf830e29-9b3e-4f58-9d77-a9728501439e.jpg?v=1736754269"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr MICRO Cut Cylindrical Shape 03mm x 13mm x 3mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut. \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299565949217,"sku":"21201273","price":666.66,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220895535-zya-0313-3-micro-rgb-Prim_ccb1041a-8749-4ddb-bd54-7157a2bcf37f.jpg?v=1736754268"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr MICRO Cut  Cylindrical Shape with radius end 03mm x 13mm x 3mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299662450977,"sku":"21205173","price":741.69,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220869000-wrc-0313-3-micro-rgb-Prim_051ffe05-9ea2-4d41-84fe-53db5035acf4.jpg?v=1736754267"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Cylindrical Shape with radius end 03mm x 13mm x 3mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299707670817,"sku":"21205183","price":245.3,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220049662-wrc-0313-3-z3-plus-rgb-Prim_3304a93b-ac15-4364-b8eb-6eead2090a39.jpg?v=1736754267"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-round-tree-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Round Tree Shape 03mm x 13mm x 3mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecification:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299757052193,"sku":"21218133","price":329.25,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220955550-rbf-0313-3-z3-plus-rgb-Prim_f7e9eb74-546f-48cc-b676-f1b397715931.jpg?v=1736754266"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-round-tree-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr MICRO Cut  Round Tree Shape 03mm x 13mm x 3mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299803877665,"sku":"21218173","price":594.26,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220955352-rbf-0313-3-micro-rgb-Prim.jpg?v=1736754265"},{"product_id":"pferd-hss-spiral-drill-3-0mm-inox-10pc-pack","title":"PFERD HSS Spiral Drill 3.0mm INOX  10pc pack","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 3,0mm (10pcs in container)\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 33mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 61mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 2 650  5 300 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 3 200  6 350 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 1 050  2 650 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 1 600  4 250 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 33mm\\n - Overall Length : 61mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 1 050  2 100 RPM \\n Steel and Cast Steel \u0026lt; 220HB : 2 650  3 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 2 100  2 650 RPM\\n  Hard Non Ferrous Metals : 2 650  5 300 RPM\\n  Soft Non Ferrous Metals : 3 200  6 350 RPM\\n  Cast Iron : 1 050  2 650 RPM\\n  Plastics and Other Materials : 1 600  4 250 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15235,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299887337761,"sku":"25203553","price":414.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167311-spb-din338-hsse-n-3-0-inox-rgb-Secon-1.jpg?v=1736754264"},{"product_id":"pferd-hss-spiral-drill-3-5mm-inox-10pc-pack","title":"PFERD HSS Spiral Drill 3.5mm INOX  10pc pack","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e Advantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 3,5mm (10pcs in container)\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 39mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 70mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 900  1 800 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 2 300  4 550 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 2 750  5 450 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 900  2 300 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 1 350  3 650 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 3,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 39mm\\n - Overall Length : 70mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 900  1 800 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 300  3 200 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 800  2 300 RPM\\n  Hard Non Ferrous Metals : 2 300  4 550 RPM\\n  Soft Non Ferrous Metals : 2 750  5 450 RPM\\n  Cast Iron : 900  2 300 RPM\\n  Plastics and Other Materials : 1 350  3 650 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299958214945,"sku":"25203557","price":512.9,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167380-spb-din338-hsse-n-3-5-inox-rgb-Secon-1.jpg?v=1736754263"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 06mm x 16mm x 6mm Shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46300146630945,"sku":"21301612","price":362.94,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220609149-zya-0616-6-mx-ncc-rgb-Prim.jpg?v=1736754262"},{"product_id":"pferd-hss-spiral-drill-4-0mm-inox-10pc-pack","title":"PFERD HSS Spiral Drill 4.0mm INOX  10pc pack","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 4,0mm (10pcs in container)\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 43mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 75mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 800  1 600 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 2 000  4 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 2 400  4 800 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 800  2 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 1 200  3 200 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 43mm\\n - Overall Length : 75mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 800  1 600 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 2 000  2 800 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 600  2 000 RPM\\n  Hard Non Ferrous Metals : 2 000  4 000 RPM\\n  Soft Non Ferrous Metals : 2 400  4 800 RPM\\n  Cast Iron : 800  2 000 RPM\\n  Plastics and Other Materials : 1 200  3 200 RPM \\n \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46300351136033,"sku":"25203559","price":547.4,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167410-spb-din338-hsse-n-4-0-inox-rgb-Secon-1.jpg?v=1736754261"},{"product_id":"pferd-hss-spiral-drill-4-5mm-inox-10pc-pack","title":"PFERD HSS Spiral Drill 4.5mm INOX  10pc pack","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 4,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 47mm\\n - Overall Length : 80mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 700  1 400 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 750  2 500 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 400  1 750 RPM\\n  Hard Non Ferrous Metals : 1 750  3 550 RPM\\n  Soft Non Ferrous Metals : 2 100  4 250 RPM\\n  Cast Iron : 700  1 750 RPM\\n  Plastics and Other Materials : 1 050  2 850 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Advantages:\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Specifications:\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 4,5mm\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 47mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 80mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Operating Instructions:\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 700  1 400 RPM\u003cbr data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 1 750  2 500 RPM\u003cbr data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 1 400  1 750 RPM\u003cbr data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 1 750  3 550 RPM\u003cbr data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 2 100  4 250 RPM\u003cbr data-mce-fragment=\"1\"\u003e Cast Iron : 700  1 750 RPM\u003cbr data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 1 050  2 850 RPM \u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46300860776737,"sku":"25203563","price":621.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167694-spb-din338-hsse-n-4-5-inox-rgb-Secon-1.jpg?v=1736754260"},{"product_id":"pferd-hss-spiral-drill-5-0mm-inox","title":"PFERD HSS Spiral Drill 5.0mm INOX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 5,0mm\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 52mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 86mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 650  1 250 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 1 600  3 200 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 1 900  3 800 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 650  1 250 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 950  2 550 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 52mm\\n - Overall Length : 86mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 650  1 250 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 600  2 250 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 250  1 600 RPM\\n  Hard Non Ferrous Metals : 1 600  3 200 RPM\\n  Soft Non Ferrous Metals : 1 900  3 800 RPM\\n  Cast Iron : 650  1 250 RPM\\n  Plastics and Other Materials : 950  2 550 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46301089268001,"sku":"25203564","price":65.67,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167717-spb-din338-hsse-n-5-0-inox-rgb-Prim.jpg?v=1736754259"},{"product_id":"pferd-hss-spiral-drill-5-5mm-inox","title":"PFERD HSS Spiral Drill 5.5mm INOX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 5,5mm\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 57mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 93mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 600  1 150 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 1 450  2 900 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 1 750  3 450 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 600  1 450 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 850  2 300 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 5,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Rust and acid resistant metals (Inox) : 600  1 150 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 150  1 450 RPM\\n  Hard Non Ferrous Metals : 1 450  2 900 RPM\\n  Soft Non Ferrous Metals : 1 750  3 450 RPM\\n  Cast Iron : 600  1 450 RPM\\n  Plastics and Other Materials : 850  2 300 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46301248258337,"sku":"25203568","price":85.39,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167755-spb-din338-hsse-n-5-5-inox-rgb-Prim.jpg?v=1736754258"},{"product_id":"pferd-hss-spiral-drill-6-0mm-inox","title":"PFERD HSS Spiral Drill 6.0mm INOX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 6,0mm\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 57mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 93mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 550  1 050 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 1 350  2 650 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 1 600  3 200 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 550  1 350 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 800  2 100 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 57mm\\n - Overall Length : 93mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 550  1 050 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 350  1 850 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 050  1 350 RPM\\n  Hard Non Ferrous Metals : 1 350  2 650 RPM\\n  Soft Non Ferrous Metals : 1 600  3 200 RPM\\n  Cast Iron : 550  1 350 RPM\\n  Plastics and Other Materials : 800  2 100 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46301476421921,"sku":"25203569","price":87.11,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167762-spb-din338-hsse-n-6-0-inox-rgb-Prim.jpg?v=1736754258"},{"product_id":"pferd-hss-spiral-drill-6-5mm-inox","title":"PFERD HSS Spiral Drill 6.5mm INOX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 6,5mm\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 63mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 101mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e Operating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 500  1 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 1 250  2 450 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 1 450  2 950 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 500  1 250 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 750  1 950 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 6,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 63mm\\n - Overall Length : 101mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 500  1 000 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 250  1 700 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 1 000  1 250 RPM\\n  Hard Non Ferrous Metals : 1 250  2 450 RPM\\n  Soft Non Ferrous Metals : 1 450  2 950 RPM\\n  Cast Iron : 500  1 250 RPM\\n  Plastics and Other Materials : 750  1 950 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46301968269601,"sku":"25203570","price":100.63,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167779-spb-din338-hsse-n-6-5-inox-rgb-Prim.jpg?v=1736754257"},{"product_id":"pferd-hss-spiral-drill-7-0mm-inox","title":"PFERD HSS Spiral Drill 7.0mm INOX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 7,0mm\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 69mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 109mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 450  900 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 1 150  2 300 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 1 350  2 750 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 450  1 150 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 700  1 800 RPM \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,0mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  900 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 150  1 600 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 900  1 150 RPM\\n  Hard Non Ferrous Metals : 1 150  2 300 RPM\\n  Soft Non Ferrous Metals : 1 350  2 750 RPM\\n  Cast Iron : 450  1 150 RPM\\n  Plastics and Other Materials : 700  1 800 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302023909665,"sku":"25203572","price":107.81,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167984-spb-din338-hsse-n-7-0-inox-rgb-Prim.jpg?v=1736754256"},{"product_id":"pferd-hss-spiral-drill-7-5mm-inox","title":"PFERD HSS Spiral Drill 7.5mm INOX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \\n \\n All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \\n \\n Advantages:\\n - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \\n - Robust tip profile.\\n - Very good temperature resistance due to Co content. \\n - Easy Centring.\\n - Very long Tool life.\\n - Good Chip Removal.\\n - Consistent diameter throughout drill bit length. \\n \\n Specifications:\\n - Diameter : 7,5mm\\n - INOX HSSE Co5 (M35) version\\n - 135° Point Angle\\n - Helix Angle : 36° \\n - Spiral Drill Length : 69mm\\n - Overall Length : 109mm \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n Rust and acid resistant metals (Inox) : 450  850 RPM\\n Steel and Cast Steel \u0026lt; 220HB : 1 050  1 500 RPM\\n  Steel and Cast Steel \u0026gt; 220HB : 850  1 050 RPM\\n  Hard Non Ferrous Metals : 1 050  2 100 RPM\\n  Soft Non Ferrous Metals : 1 250  2 550 RPM\\n  Cast Iron : 450  1 050 RPM\\n  Plastics and Other Materials : 650  1 700 RPM \\n - Only use machines that are intended for use with the relevant tool.\\n - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \\n - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\\n - Ensure correct Personal Protective Equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD spiral drills are fully ground, right-hand turning versions that produces precise drilled holes due to its high concentricity and exact centring. PFERD offers spiral drills in STEEL (118° point angle) and INOX (135° point angle) types suitable for industrial use. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e All PFERD drills are completely ground spiral drills. They are ground both in the chip flute and guide chamfer as well as the drill tip. All PFERD drills are also cross ground. This makes the drill suitable for highly precise positioning on the workpiece and supports centring during the drilling application. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Advantages:\u003cbr data-mce-fragment=\"1\"\u003e - Particularly well suited for tough and hard materials, such as alloyed and high strength steels as well as stainless steel (Inox). \u003cbr data-mce-fragment=\"1\"\u003e - Robust tip profile.\u003cbr data-mce-fragment=\"1\"\u003e - Very good temperature resistance due to Co content. \u003cbr data-mce-fragment=\"1\"\u003e - Easy Centring.\u003cbr data-mce-fragment=\"1\"\u003e - Very long Tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Good Chip Removal.\u003cbr data-mce-fragment=\"1\"\u003e - Consistent diameter throughout drill bit length. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Specifications:\u003cbr data-mce-fragment=\"1\"\u003e - Diameter : 7,5mm\u003cbr data-mce-fragment=\"1\"\u003e - INOX HSSE Co5 (M35) version\u003cbr data-mce-fragment=\"1\"\u003e - 135° Point Angle\u003cbr data-mce-fragment=\"1\"\u003e - Helix Angle : 36° \u003cbr data-mce-fragment=\"1\"\u003e - Spiral Drill Length : 69mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length : 109mm \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Operating Instructions:\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e Rust and acid resistant metals (Inox) : 450  850 RPM\u003cbr data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 220HB : 1 050  1 500 RPM\u003cbr data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 220HB : 850  1 050 RPM\u003cbr data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 1 050  2 100 RPM\u003cbr data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 1 250  2 550 RPM\u003cbr data-mce-fragment=\"1\"\u003e Cast Iron : 450  1 050 RPM\u003cbr data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 650  1 700 RPM \u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - When cutting metals, use suitable cutting fluid or cooling fluid. (Smoother drilling action and extended service life.) \u003cbr data-mce-fragment=\"1\"\u003e - When working on stainless steel (Inox) remove all particles which develops during the application from the workpiece and ensure to clean the workpiece chemically or mechanically to reduce the risk of corrosion.\u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct Personal Protective Equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302080663841,"sku":"25203573","price":141.74,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220167991-spb-din338-hsse-n-7-5-inox-rgb-Prim.jpg?v=1736754255"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 12mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302124179745,"sku":"21301912","price":646.01,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220609170-zya-1225-6-mx-ncc-rgb-Prim.jpg?v=1736754254"}],"url":"https:\/\/pferdza.com\/collections\/test.oembed?page=8","provider":"PFERD South Africa","version":"1.0","type":"link"}