{"title":"Cylindrical for Universal use","description":"","products":[{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 06mm x 16mm x 6mm Shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46300146630945,"sku":"21301612","price":362.94,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220609149-zya-0616-6-mx-ncc-rgb-Prim.jpg?v=1736754262"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 12mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302124179745,"sku":"21301912","price":646.01,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220609170-zya-1225-6-mx-ncc-rgb-Prim.jpg?v=1736754254"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical shape with radius end 06mm x 16mm x 6mm Shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302156357921,"sku":"21305012","price":403.31,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220609224-wrc-0616-6-mx-ncc-rgb-Prim.jpg?v=1736754253"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 12mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302178541857,"sku":"21305312","price":795.4,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220609255-wrc-1225-6-mx-ncc-rgb-Prim.jpg?v=1736754251"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank-universal-cut","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 03mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 40mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000 - 64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000 - 64 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478833369377,"sku":"21352112","price":209.01,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0313-3-z3-plus-rgb.png?v=1736753739"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank-universal-cut-copy-1","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 06mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000 - 19 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000 - 32 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478859976993,"sku":"21352212","price":287.5,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0613-3-z3-plus-rgb.png?v=1736753738"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-06mm-x-13mm-x-3mm-shank-universal-cut-copy","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 08mm x 20mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 8mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 60mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 18 000 - 24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 10 000 - 14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Stainless Steel : 10 000 - 14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 10 000 - 14 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 18 000 - 24 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Cast Iron : 18 000 - 24 000  RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478892351777,"sku":"21305112","price":566.26,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0820-6-mx-ncc-rgb.png?v=1736753737"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-06mm-x-13mm-x-3mm-shank-universal-cut","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 06mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : \u003cspan\u003eCylindrical without end cut\u003c\/span\u003e. (ZYA)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Stainless Steel : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Hard Non Ferrous Metals : 13 000 - 19 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Soft Non Ferrous Metals : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Cast Iron : 24 000 - 32 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478901657889,"sku":"21351412","price":231.15,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-0613-3-mx-ncc-rgb.png?v=1736753735"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank-universal-cut-copy-2","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 03mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : \u003cspan\u003eCylindrical without end cut\u003c\/span\u003e\u003cspan\u003e. (ZYA)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 40mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000 - 64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000 - 64 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478908506401,"sku":"21351312","price":188.54,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-0313-3-mx-ncc-rgb.png?v=1736753735"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-16mm-x-25mm-x-6mm-shank-universal-cut-copy","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape  16mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : \u003cspan\u003eCylindrical without end cut \u003c\/span\u003e\u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 16mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 9 000 - 12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 5 000 - 7 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 5 000 - 7 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 5 000 - 7 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 9 000 - 12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 9 000 - 12 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478915060001,"sku":"21302012","price":934.55,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-1625-6-z3-plus-rgb.png?v=1736753734"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-10mm-x-20mm-x-6mm-shank-universal-cut","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 10mm x 20mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 10mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 60mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 14 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 8 000 - 11 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Stainless Steel : 8 000 - 11 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 8 000 - 11 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 14 000 - 19 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Cast Iron : 14 000 - 19 000  RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50555394359585,"sku":"21305212","price":506.98,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-1020-6-mx-ncc-rgb.png?v=1736753724"},{"product_id":"pferd-solid-carbide-endmill-cylindrical-shape-with-four-blades","title":"PFERD Solid Carbide End mill - Universal Cylindrical Shape with four blades","description":"\u003cp\u003ePFERD solid tungsten carbide end mills are suitable for universal use on a variety of materials. Mills for various applications, from roughing through to finishing. The chamfer design is also suitable for ramping. Smooth straight shank HA in accordance with DIN 6535.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e- Design with neck chip channel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}'\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UC4-M030C-M57HA6 AL40","offer_id":51251837206817,"sku":"23000148","price":877.22,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M040C-M57HA6 AL40","offer_id":51251837239585,"sku":"23000149","price":876.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M050C-M57HA6 AL40","offer_id":51251837272353,"sku":"23000150","price":876.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M060C-M57HA AL40","offer_id":51251837305121,"sku":"23000151","price":876.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M080C-M63HA AL40","offer_id":51251837337889,"sku":"23000152","price":1258.5,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M100C-M72HA AL40","offer_id":51251837370657,"sku":"23000153","price":1817.35,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M120C-M83HA AL40","offer_id":52879158772001,"sku":"23000154","price":2956.77,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M160C-M92HA AL40","offer_id":52879158804769,"sku":"23000155","price":5287.76,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC4-M200C-M104HA AL40","offer_id":52879158837537,"sku":"23000156","price":8818.14,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-uc4-m030c-m57ha6-al40-rgb.png?v=1746540512"},{"product_id":"pferd-tungsten-carbide-burr-cut-mx-ncc-cylindrical-shape-10mm-x-20mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr Cylindrical Shape 10mm x 20mm x 6mm shank Universal Cut","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD MX NCC tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape: Cylindrical with end cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 10mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 60mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 14 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 8 000 - 11 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 8 000 - 11 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 14 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 8 000  1 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 14 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":51343588884769,"sku":"21300812","price":606.51,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zyas-1020-6-mx-ncc-rgb.png?v=1749036751"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-end-cut-03mm-x-13mm-x-3mm-shank-universal-cut-copy","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with end cut 03mm x 13mm x 3mm shank Universal Cut","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs, or rotary files, are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : \u003cspan\u003eCylindrical with end cut\u003c\/span\u003e\u003cspan\u003e. (ZYAS)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 40mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000 - 64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000 - 64 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":51806918279457,"sku":"21351112","price":188.26,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-0313-3-mx-ncc-rgb.png?v=1736753735"},{"product_id":"pferd-solid-carbide-end-mill-cylindrical-shape-with-six-blades","title":"PFERD Solid Carbide End mill - Universal Cylindrical Shape with six blades","description":"\u003cp\u003ePFERD solid tungsten carbide end mills are suitable for universal use on a variety of materials. Mills for various applications, from roughing through to finishing. The chamfer design is also suitable for ramping. Smooth straight shank HA in accordance with DIN 6535.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e- Design with neck chip channel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UC6-M060S-M57HA AL40","offer_id":52879312847137,"sku":"23000174","price":877.22,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M080S-M63HA AL40","offer_id":52879312879905,"sku":"23000175","price":1257.99,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M100S-M72HA AL40","offer_id":52879312912673,"sku":"23000176","price":1817.63,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M120S-M83HA AL40","offer_id":52879312945441,"sku":"23000177","price":2956.77,"currency_code":"ZAR","in_stock":true},{"title":"SCM-UC6-M160S-M92HA AL40","offer_id":52879312978209,"sku":"23000178","price":5288.45,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-uc6-m060s-m57ha-al40-rgb.png?v=1782132350"},{"product_id":"pferd-solid-carbide-end-mill-cylindrical-shape-with-eight-blades","title":"PFERD Solid Carbide End mill - Universal Cylindrical Shape with eight blades","description":"\u003cp\u003ePFERD solid tungsten carbide end mills are suitable for universal use on a variety of materials. Mills for various applications, from roughing through to finishing. The chamfer design is also suitable for ramping. Smooth straight shank HA in accordance with DIN 6535.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Universal use on the most important materials.\u003cbr\u003e- High productivity due to optimum stock removal rate.\u003cbr\u003e- State-of-the-art coatings.\u003cbr\u003e- Design with neck chip channel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor specifications and operation specifics, please click the link below:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/assets.pferd.com\/pfd\/products\/pdfs\/wzh25-catalogue-10-web-int-en.pdf\" title=\"Cutting tools for stationary applications\"\u003eCutting tools for stationary applications\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"SCM-UC8-M200S-M104HA AL40","offer_id":52879994847521,"sku":null,"price":8817.91,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/scm-uc8-m200s-s104ha-al40-rgb.png?v=1782132772"}],"url":"https:\/\/pferdza.com\/collections\/cylindrical-for-universal-use.oembed","provider":"PFERD South Africa","version":"1.0","type":"link"}