{"title":"BURRS","description":null,"products":[{"product_id":"pferd-tungsten-carbide-burr-allround-cut-cylindrical-shape-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Cylindrical Shape 06mm x 16mm x 6mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e Specifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with End Cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46298112426273,"sku":"21001000","price":576.27,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zyas-0616-6-allround-rgb.png?v=1793624695"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-cylindrical-shape-with-radius-end-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Cylindrical Shape with radius end 06mm x 16mm x 6mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with radius end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with radius end (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. cylindrical with radius end head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299063943457,"sku":"21001010","price":585.35,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0616-6-allround-rgb.png?v=1793624634"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-round-tree-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Round Tree 06mm x 18mm x 6mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. round tree shape head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 18mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 24 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: round tree shape head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. round tree shape head shank length including operating observe following recommended rotational steel cast hrc rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines with power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" advantages:=\"\" specifications:=\"\" shape:=\"\" diameter:=\"\" length:=\"\" shank:=\"\" instructions:=\"\" speed:=\"\" :=\"\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299114570017,"sku":"21001029","price":581.56,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/rbf-0618-6-allround-rgb.png?v=1793624568"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr MICRO cut Cylindrical Shape 06mm x 16mm x 6mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with end cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299157496097,"sku":"21100276","price":769.41,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zyas-0616-6-micro-rgb.png?v=1793624494"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-with-radius-end-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr MICRO cut Cylindrical Shape with radius end, 06mm x 16mm x 6mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299262026017,"sku":"21105076","price":782.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0616-6-micro-rgb.png?v=1793624395"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-tree-shape-with-radius-end-06mm-x-18mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr MICRO cut Tree Shape with radius end 06mm x 18mm x 6mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round Tree shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 18mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 32 000  40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 32 000  40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 24 000  32 000 RPM\\n  Stainless Steel : 24 000  32 000 RPM\\n  Hard Non Ferrous Metals : 24 000  32 000 RPM\\n  High Temperature Resistant Materials : 24 000  32 000 RPM\\n  Cast Iron : 32 000  40 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299307671841,"sku":"21157205","price":776.71,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/rbf-0618-6-micro-rgb.png?v=1793624325"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-cylindrical-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Cylindrical Shape 03mm x 13mm x 3mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Cylindrical with end cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299523645729,"sku":"21200283","price":310.56,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zyas-0313-3-z3-plus-rgb.png?v=1793624267"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr MICRO Cut Cylindrical Shape 03mm x 13mm x 3mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut. \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299565949217,"sku":"21201273","price":437.63,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-0313-3-micro-rgb.png?v=1793624170"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr MICRO Cut  Cylindrical Shape with radius end 03mm x 13mm x 3mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299662450977,"sku":"21205173","price":486.45,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0313-3-micro-rgb_b384d15e-4956-489b-80d1-1bbf924f2421.png?v=1793624092"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Cylindrical Shape with radius end 03mm x 13mm x 3mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Culindrical with radius end. (Bullnose)\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299707670817,"sku":"21205183","price":310.56,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0313-3-z3-plus-rgb_28723cd8-b78a-4587-9696-1e359fd44573.png?v=1793623986"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-round-tree-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Round Tree Shape 03mm x 13mm x 3mm shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecification:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299757052193,"sku":"21218133","price":310.56,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/rbf-0313-3-z3-plus-rgb.png?v=1793623927"},{"product_id":"pferd-tungsten-carbide-burr-micro-cut-round-tree-shape-03mm-x-13mm-x-3mm-shank","title":"PFERD Tungsten Carbide Burr MICRO Cut  Round Tree Shape 03mm x 13mm x 3mm Shank","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e PFERD \u003cstrong\u003eMICRO\u003c\/strong\u003e cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for a variety of materials up to 68 HRC.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e - Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e - Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 64 000  80 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies. \\n \\n Advantages:\\n - Suitable for a variety of materials up to 68 HRC.\\n - Good stock removal performance and tool life.\\n - Exceptional dimensional stability. (No change in geometry due to wear.)\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 64 000  80 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 48 000  64 000 RPM\\n  Stainless Steel : 48 000  64 000 RPM\\n  Hard Non Ferrous Metals : 48 000  64 000 RPM\\n  High Temperature Resistant Materials : 48 000  64 000 RPM\\n  Cast Iron : 64 000  80 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46299803877665,"sku":"21218173","price":486.45,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220935699-6-5-12-mx-ncc-verpackung-offen-rgb-Prim.jpg?v=1693302733"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 06mm x 16mm x 6mm Shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46300146630945,"sku":"21301612","price":347.42,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220935705-6-5-6-mx-ncc-verpackung-offen-rgb-Prim.jpg?v=1693302792"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 12mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical without end cut \u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical without end cut\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302124179745,"sku":"21301912","price":691.15,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220226667-1303-micro-offen-rgb-Prim.jpg?v=1693302849"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-06mm-x-16mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical shape with radius end 06mm x 16mm x 6mm Shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 16mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 6mm\\n - Head Length: 16mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302156357921,"sku":"21305012","price":386.06,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220226674-1306-micro-offen-rgb-Prim.jpg?v=1693302934"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 12mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302178541857,"sku":"21305312","price":565.69,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220226698-1406-allround-offen-rgb-Prim.jpg?v=1693303011"},{"product_id":"pferd-tungsten-carbide-burr-ball-shape-06mm-x-06mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr - Ball shape 06mm x 06mm x 6mm Shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Ball \u003cem\u003e(KUD)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 5mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302190338337,"sku":"21312512","price":324.65,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220420423-1403-allround-offen-rgb-Prim.png?v=1693303145"},{"product_id":"pferd-tungsten-carbide-burr-ball-shape-12mm-x-10mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr  Ball Shape 12mm x 10mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Ball \u003cem\u003e(KUD)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 10mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 51mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302197416225,"sku":"21312812","price":528.2,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220420430-1404-allround-offen-rgb-Prim.png?v=1693303226"},{"product_id":"pferd-tungsten-carbide-burr-tree-shape-with-radius-end-06mm-x-18mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr  Tree shape with radius end 06mm x 18mm x 6mm Shank Universal cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape: Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 18mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape: Round Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302203609377,"sku":"21317312","price":383.24,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220225318-1504-z3-plus-offen-rgb-Prim.jpg?v=1693303306"},{"product_id":"pferd-tungsten-carbide-burr-tree-shape-with-radius-end-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr  Tree Shape with Radius End 12mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Round Tree Shape \u003cem\u003e(RBF)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions\u003c\/span\u003e:\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Round Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302212686113,"sku":"21317812","price":446.72,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220133576-1412-allround-rgb-Primary.png?v=1715089613"},{"product_id":"pferd-tungsten-carbide-burr-pointed-tree-shape-06mm-x-18mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr  Pointed Tree shape 06mm x 18mm x 6mm Shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Pointed Tree Shape \u003cem\u003e(SPG)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 18mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 55mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Operating Instructions:\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302235820321,"sku":"21322512","price":371.85,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220055892-1501-z5-rgb-Primary.png?v=1715092016"},{"product_id":"pferd-tungsten-carbide-burr-pointed-tree-shape-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr  Pointed Tree Shape 12mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e - Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e - Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e - Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Shape : Pointed Tree Shape \u003cem\u003e(SPG)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e - Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e - Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e - Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e - Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e - Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e - For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e - Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e - Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":46302255153441,"sku":"21322712","price":481.85,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220004357-1812-steel-rgb-Primary.png?v=1736753794"},{"product_id":"pferd-tungsten-carbide-burr-set-5pc-12mm-diameter","title":"PFERD Tungsten Carbide Burr Set  5pc 12mm diameter","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003eThe set contains five Tungsten Carbide Burrs in various shapes and sizes all with a 6mm shank consisting of PFERD's COMBICUT suitable for universal use.\u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCylindrical Without End Cut (ZYA 12mm x 25mm x 6mm Shank)\u003cbr\u003eBall Shape (KUD 12mm x 10mm x 6mm Shank)\u003cbr\u003eCylindrical Shape with Radius End €œBullnose€ ( WRC 12mm x 25mm x 6mm Shank)\u003cbr\u003ePointed Tree Shape (SPG 12mm x 25mm x 6mm Shank)\u003cbr\u003eRound Tree Shape (RBF 12mm x 25mm x 6mm Shank)\u003c\/p\u003e\n\u003cp\u003eAdvantages:\u003cbr\u003e- Suitable for universal use.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Economic machining of a wide range of materials.\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003c\/p\u003e\n\u003cp\u003eOperating Instructions:\u003cbr\u003e- Observe the following recommended rotational speed:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSteel and Cast Steel \u0026amp;lt; 38 HRC : 12 000  16 000 RPM\u003cbr\u003eSteel and Cast Steel \u0026amp;gt; 38 HRC : 7 000  9 000 RPM\u003cbr\u003eStainless Steel : 7 000  9 000 RPM\u003cbr\u003eHard Non Ferrous Metals : 7 000  9 000 RPM\u003cbr\u003eSoft Non Ferrous Metals : 7 000  12 000 RPM\u003cbr\u003eCast Iron : 12 000  16 000 RPM\u003cbr\u003ePlastics and Other Materials : 12 000  24 000 RPM\u003c\/p\u003e\n\u003cp\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302301946145,"sku":"21900501","price":3636.01,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220935699-6-5-12-mx-ncc-verpackung-offen-rgb-Prim.jpg?v=1693302733"},{"product_id":"pferd-tungsten-carbide-burr-set-5pc-6mm-diameter","title":"PFERD Tungsten Carbide Burr Set  5pc 6mm diameter","description":"\u003cdiv\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe set contains five Tungsten Carbide Burrs in various shapes and sizes all with a 6mm shank consisting of PFERD's COMBICUT suitable for universal use.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003c\/div\u003e\n\u003cdiv\u003e- Cylindrical Without End Cut (ZYA 06mm x 16mm x 6mm Shank)\u003c\/div\u003e\n\u003cdiv\u003e- Ball Shape (KUD 06mm x 05mm x 6mm Shank)\u003c\/div\u003e\n\u003cdiv\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 06mm x 16mm x 6mm Shank)\u003c\/div\u003e\n\u003cdiv\u003e- Pointed Tree Shape (SPG 06 x 18mm x 6mm Shank)\u003c\/div\u003e\n\u003cdiv\u003e- Round Tree Shape (RBF 06mm x 18mm x 6mm Shank)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAdvantages:\u003c\/div\u003e\n\u003cdiv\u003e- Suitable for universal use.\u003c\/div\u003e\n\u003cdiv\u003e- Good stock removal performance and tool life.\u003c\/div\u003e\n\u003cdiv\u003e- Economic machining of a wide range of materials.\u003c\/div\u003e\n\u003cdiv\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eOperating Instructions:\u003c\/div\u003e\n\u003cdiv\u003e- Observe the following recommended rotational speed:\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e  Steel and Cast Steel \u0026amp;lt; 38 HRC : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e  Steel and Cast Steel \u0026amp;gt; 38 HRC : 13 000  19 000 RPM \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e  Stainless Steel : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e  Hard Non Ferrous Metals : 13 000  19 000 RPM\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e  Soft Non Ferrous Metals : 13 000  24 000 RPM\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e  Cast Iron : 24 000  32 000 RPM\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e  Plastics and Other Materials : 24 000  48 000 RPM\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e- Maximum Overhang = 10mm\u003c\/div\u003e\n\u003cdiv\u003e- Clamping Depth = 20mm\u003c\/div\u003e\n\u003cdiv\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003c\/div\u003e\n\u003cdiv\u003e- Only use machines that are intended for use with the relevant tool.\u003c\/div\u003e\n\u003cdiv\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003c\/div\u003e\n\u003cdiv\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/div\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302334189857,"sku":"21900502","price":1833.68,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220935705-6-5-6-mx-ncc-verpackung-offen-rgb-Prim.jpg?v=1693302792"},{"product_id":"pferd-tungsten-carbide-burr-set-3pc-x-03mm-diameter-micro-cut","title":"PFERD Tungsten Carbide Burr Set  3pc x 03mm diameter MICRO Cut","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003ePFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies.\u003c\/p\u003e\n\u003cp\u003eThe set (1303) contains three MICRO cut Tungsten Carbide Burrs in different shapes consisting of a 3mm shank.\u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003cbr\u003e- Cylindrical Without End Cut (ZYA 03mm x 13mm x 3mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 03mm x 13mm x 3mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 03mm x 13mm x 3mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Suitable for a variety of materials up to 68 HRC.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003cbr\u003e- Minimal vibration and noise.\u003cbr\u003e- Easy and comfortable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026amp;lt; 38 HRC : 64 000  80 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026amp;gt; 38 HRC : 48 000  64 000 RPM\u003cbr\u003e  Stainless Steel : 48 000  64 000 RPM\u003cbr\u003e  Hard Non Ferrous Metals : 48 000  64 000 RPM\u003cbr\u003e  High Temperature Resistant Materials : 48 000  64 000 RPM\u003cbr\u003e  Cast Iron : 64 000  80 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302383472929,"sku":"21901303","price":1688.37,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220226667-1303-micro-offen-rgb-Prim.jpg?v=1693302849"},{"product_id":"pferd-tungsten-carbide-burr-set-3pc-x-06mm-diameter-micro-cut","title":"PFERD Tungsten Carbide Burr Set  3pc x 06mm diameter MICRO Cut","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003ePFERD MICRO cut tungsten carbide burrs are specifically designed for finishing applications that require high stock removal rates and a very high quality surface finish. These MICRO cut burrs are suitable for applications where Mounted Points are traditionally used, such as construction and repair of moulds and dies.\u003c\/p\u003e\n\u003cp\u003eThe set (1606) contains three \u003cstrong\u003eMICRO \u003c\/strong\u003ecut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank.\u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003cbr\u003e- Cylindrical With End Cut (ZYAS 06mm x 16mm x 6mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 06mm x 16mm x 6mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 06mm x 16mm x 6mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Suitable for a variety of materials up to 68 HRC.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003cbr\u003e- Minimal vibration and noise.\u003cbr\u003e- Easy and comfortable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026amp;lt; 38 HRC : 32 000  40 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026amp;gt; 38 HRC : 24 000  32 000 RPM\u003cbr\u003e  Stainless Steel : 24 000  32 000 RPM\u003cbr\u003e  Hard Non Ferrous Metals : 24 000  32 000 RPM\u003cbr\u003e  High Temperature Resistant Materials : 24 000  32 000 RPM\u003cbr\u003e  Cast Iron : 32 000  40 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302446092577,"sku":"21901306","price":2213.12,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220226674-1306-micro-offen-rgb-Prim.jpg?v=1693302934"},{"product_id":"pferd-tungsten-carbide-burr-set-3pc-x-06mm-diameter-allround-cut","title":"PFERD Tungsten Carbide Burr Set  3pc x 06mm diameter ALLROUND Cut","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003ePFERD \u003cstrong\u003eALLROUND \u003c\/strong\u003ecut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort.\u003c\/p\u003e\n\u003cp\u003eThe set (1406) contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank.\u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003cbr\u003e- Cylindrical With End Cut (ZYAS 06mm x 16mm x 6mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 06mm x 16mm x 6mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 06mm x 16mm x 6mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Increased stock removal rates.\u003cbr\u003e- Suitable for a variety of materials.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003cbr\u003e- Minimal vibration and noise.\u003cbr\u003e- Easy and comfortable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026amp;lt; 38 HRC : 24 000  40 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026amp;gt; 38 HRC : 13 000  24 000 RPM\u003cbr\u003e  Stainless Steel : 24 000  32 000 RPM\u003cbr\u003e  Soft Non Ferrous Materials : 24 000  40 000 RPM\u003cbr\u003e  Hard Non Ferrous Materials : 24 000  32 000 RPM\u003cbr\u003e  Cast Iron : 24 000  48 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302483218721,"sku":"21901406","price":1787.27,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220226698-1406-allround-offen-rgb-Prim.jpg?v=1693303011"},{"product_id":"pferd-tungsten-carbide-burr-set-3pc-x-03mm-diameter-allround-cut","title":"PFERD Tungsten Carbide Burr Set  3pc x 03mm diameter ALLROUND Cut","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003ePFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The \u003cstrong\u003eALLROUND \u003c\/strong\u003ecut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort.\u003c\/p\u003e\n\u003cp\u003eThe set (1403) contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 3mm shank.\u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003cbr\u003e- Cylindrical With End Cut (ZYAS 03mm x 13mm x 3mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 03mm x 13mm x 3mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 03mm x 13mm x 3mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Increased stock removal rates.\u003cbr\u003e- Suitable for a variety of materials.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003cbr\u003e- Minimal vibration and noise.\u003cbr\u003e- Easy and comfortable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026amp;lt; 38 HRC : 48 000  80 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026amp;gt; 38 HRC : 27 000  48 000 RPM\u003cbr\u003e  Stainless Steel : 48 000  64 000 RPM\u003cbr\u003e  Soft Non Ferrous Materials : 48 000  80 000 RPM\u003cbr\u003e  Hard Non Ferrous Materials : 48 000  64 000 RPM\u003cbr\u003e  Cast Iron : 48 000  95 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr\u003e- Avoid material cross contamination.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302522900769,"sku":"21901403","price":1289.44,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220420423-1403-allround-offen-rgb-Prim.png?v=1693303145"},{"product_id":"pferd-tungsten-carbide-burr-set-3pc-x-06mm-diameter-allround-cut-1","title":"PFERD Tungsten Carbide Burr Set  3pc x 06mm diameter ALLROUND Cut","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003ePFERD \u003cstrong\u003eALLROUND \u003c\/strong\u003ecut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort.\u003c\/p\u003e\n\u003cp\u003eThe set (1404) contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 3mm shank.\u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003cbr\u003e- Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 06mm x 13mm x 3mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Increased stock removal rates.\u003cbr\u003e- Suitable for a variety of materials.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003cbr\u003e- Minimal vibration and noise.\u003cbr\u003e- Easy and comfortable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026amp;lt; 38 HRC : 24 000  40 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026amp;gt; 38 HRC : 13 000  24 000 RPM\u003cbr\u003e  Stainless Steel : 24 000  32 000 RPM\u003cbr\u003e  Soft Non Ferrous Materials : 24 000  40 000 RPM\u003cbr\u003e  Hard Non Ferrous Materials : 24 000  32 000 RPM\u003cbr\u003e  Cast Iron : 24 000  48 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr\u003e- Avoid material cross contamination.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302580998433,"sku":"21901404","price":1571.02,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220420430-1404-allround-offen-rgb-Prim.png?v=1693303226"},{"product_id":"pferd-tungsten-carbide-burr-set-3pc-x-03mm-diameter-cut-3-plus","title":"PFERD Tungsten Carbide Burr Set  3pc x 03mm diameter Cut 3 Plus","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003ePFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life.\u003c\/p\u003e\n\u003cp\u003eThe set (1504) contains three Cut 3 Plus (Cross Cut) Tungsten Carbide Burrs in different shapes consisting of a 3mm shank.\u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003cbr\u003e- Cylindrical With End Cut (ZYAS 03mm x 13mm x 3mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 03mm x 13mm x 3mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 03mm x 13mm x 3mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Suitable for a variety of materials.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003cbr\u003e- Minimal vibration and noise.\u003cbr\u003e- Easy and comfortable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026amp;lt; 38 HRC : 48 000  64 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026amp;gt; 38 HRC : 27 000  37 000 RPM\u003cbr\u003e  Stainless Steel : 27 000  37 000 RPM\u003cbr\u003e  Soft Non Ferrous Metals : 48 000  64 000 RPM\u003cbr\u003e  Hard Non Ferrous Metals : 27 000  37 000 RPM\u003cbr\u003e  High Temperature Resistant Materials : 27 000  37 000 RPM\u003cbr\u003e  Cast Iron : 48 000  64 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":46302644404513,"sku":"21901504","price":888.2,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220225318-1504-z3-plus-offen-rgb-Prim.jpg?v=1693303306"},{"product_id":"pferd-tungsten-carbide-burr-set-5-pc-x-06mm-diameter-allround-cut","title":"PFERD Tungsten Carbide Burr Set – 5 pc x 12mm diameter ALLROUND Cut","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe set \u003cem\u003e(1412)\u003c\/em\u003e contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eCylindrical With End Cut (ZYAS 12mm x 25mm x 6mm Shank)\u003c\/li\u003e\n\u003cli\u003eBall Shaped (KUD 12mm x 10mm x 6mm shank)\u003c\/li\u003e\n\u003cli\u003eCylindrical Shape with Radius End “Bullnose” ( WRC 12mm x 25mm x 6mm Shank)\u003c\/li\u003e\n\u003cli\u003ePointed Tree Shape (SPG 12mm x 25mm x6mm Shank)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRound Tree Shape (RBF 12mm x 25mm x 6mm Shank)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e Advantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 24 000 – 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 24 000 – 40 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 24 000 – 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000 – 48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD’s Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \\n \\n The set contains three ALLROUND cut Tungsten Carbide Burrs in different shapes consisting of a 6mm shank. \\n \\n - Set consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\\n Cylindrical With End Cut (ZYAS 06mm x 13mm x 3mm Shank)\\n Cylindrical Shape with Radius End “Bullnose” ( WRC 06mm x 13mm x 3mm Shank)\\n Round Tree Shape (RBF 06mm x 13mm x 3mm Shank)\\n \\n Advantages:\\n - Increased stock removal rates. \\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000 – 40 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000 – 24 000 RPM\\n  Stainless Steel : 24 000 – 32 000 RPM\\n  Soft Non Ferrous Materials : 24 000 – 40 000 RPM\\n  Hard Non Ferrous Materials : 24 000 – 32 000 RPM\\n  Cast Iron : 24 000 – 48 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of more than 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n - Avoid material cross contamination.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e- Avoid material cross contamination.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":48934446989601,"sku":"21901412","price":5870.18,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220133576-1412-allround-rgb-Primary.png?v=1715089613"},{"product_id":"pferd-tungsten-carbide-burr-set-3pc-x-03mm-diameter-micro-cut-copy","title":"PFERD Tungsten Carbide Burr Set  15pc x 03mm diameter Cut 5","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet 1501  cut 5  contains 15 small tungsten carbide burrs in the most common shapes and dimensions for general applications. The sturdy plastic box protects the tools from dirt and damage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003c\/span\u003e\u003cbr\u003e- Cylindrical With End Cut ( ZYAS 02mm x 10mm x 03mm Shank)\u003cbr\u003e- Cylindrical With End Cut ( ZYAS 03mm x 13mm x 03mm Shank)\u003cbr\u003e- Cylindrical With End Cut ( ZYAS 06mm x 07mm x 03mm Shank)\u003cbr\u003e- Cylindrical With End Cut ( ZYAS 06mm x 13mm x 03mm Shank)\u003cbr\u003e- Flame Shape ( B 03mm x 07mm x 03mm Shank)\u003cbr\u003e- Ball Shape ( KUD 04mm x 03mm x 03mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 02mm x 10mm x 03mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 03mm x 13mm x 03mm Shank)\u003cbr\u003e- Pointed Tree Shape ( SPG 03mm x07mm x03mm Shank)\u003cbr\u003e- Conical pointed Shape ( SKM 06mm x 13mm x0 3mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 03mm x 07mm x 03mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 06mm x 13mm x 03mm Shank)\u003cbr\u003e- Oval Shape ( TRE 03mm x 07mm x 03mm Shank)\u003cbr\u003e- Oval Shape ( TRE 06mm x 10mm x 03mm Shank)\u003cbr\u003e- Inverted Cone Shape ( WKNS 03mm x 07mm x 03mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages\u003c\/span\u003e:\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Exceptional dimensional stability. (No change in geometry due to wear.)\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003cbr\u003e- Minimal vibration and noise.\u003cbr\u003e- Easy and comfortable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026gt; 38 HRC : 37 000  48 000 RPM\u003cbr\u003e  Stainless Steel : 37 000  48 000 RPM\u003cbr\u003e  Hard Non Ferrous Metals : 37 000  48 000 RPM\u003cbr\u003e  High Temperature Resistant Materials : 28 000  48 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":48934556467489,"sku":"21901501","price":5214.91,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220055892-1501-z5-rgb-Primary.png?v=1715092016"},{"product_id":"pferd-tungsten-carbide-burr-set-5-pc-x-12mm-diameter-steel-cut","title":"PFERD Tungsten Carbide Burr Set  5 pc x 12mm diameter STEEL Cut","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003eSet 1812 STEEL contains five tungsten carbide burrs for processing steel and cast steel in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage. The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools. Five further slots are available for other burrs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003cbr\u003eCylindrical Without End Cut (ZYA 12mm x 25mm x 6mm Shank)\u003cbr\u003eBall Shape (KUD 12mm x 10mm x 6mm Shank)\u003cbr\u003eCylindrical Shape with Radius End €œBullnose€ ( WRC 12mm x 25mm x 6mm Shank)\u003cbr\u003ePointed Tree Shape (SPG 12 x 25mm x 6mm Shank)\u003cbr\u003eRound Tree Shape (RBF 12mm x 25mm x 6mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Up to 50% higher stock removal rates when used on steel and cast steel in comparison to conventional cross-cut burrs\u003cbr\u003e- Tangibly more aggressive, large chips and very good chip removal through the innovative tooth geometry.\u003cbr\u003e- Good stock removal performance and tool life.\u003cbr\u003e- Economic machining of a wide range of materials.\u003cbr\u003e- Suitable for Electric as well as Pneumatic Tool Drives.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003c\/p\u003e\n\u003cp\u003eSteel : 12 000  20 000 RPM\u003c\/p\u003e\n\u003cp\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":48938187063585,"sku":"21901812","price":6212.24,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220004357-1812-steel-rgb-Primary.png?v=1736753794"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-cylindrical-shape-with-radius-end-06mm-x-16mm-x-6mm-shank-copy","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Cylindrical Shape with radius end 08mm x 20mm x 6mm shank","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape: Cylindrical with radius end (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 8mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 60mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 18 000  30 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 10 000  18 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Materials : 18 000  30 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Materials : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 18 000  36 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with radius end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages. data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":48938202300705,"sku":"21001011","price":822.54,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220093184-wrc-0820-6-allround-rgb-Primary.png?v=1736753793"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-cylindrical-shape-12mm-x-25mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Cylindrical Shape 12mm x 25mm x 6mm shank","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e Specifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape: Cylindrical with End Cut (\u003cem\u003eZYAS\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  20 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Stainless Steel :12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Soft Non Ferrous Materials : 12 000  20 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Hard Non Ferrous Materials : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Cast Iron : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":48938206757153,"sku":"21001003","price":1127.29,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220092941-zyas-1225-6-allround-rgb-Primary.png?v=1736753793"},{"product_id":"pferd-tungsten-carbide-burr-allround-cut-pointed-tree-shape-10mm-x-20mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr ALLROUND Cut  Pointed Tree Shape 10mm x 20mm x 6mm shank","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD \u003cstrong\u003eALLROUND\u003c\/strong\u003e cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD's Cut 3 Plus cut (cross cut), but at 30% faster stock removal rate. The unique tooth geometry reduces the operational noise and vibration and so doing increases the overall operator comfort. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Increased stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e Specifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape: Pointed Tree(\u003cem\u003eSPG\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 10mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 60mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Steel and Cast Steel \u0026lt; 38 HRC : 14 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Steel and Cast Steel \u0026gt; 38 HRC : 8 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Stainless Steel :14 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Soft Non Ferrous Materials : 14 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Hard Non Ferrous Materials : 14 000  19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e Cast Iron : 14 000  29 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD ALLROUND cut tungsten carbide burrs are specifically developed for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous materials and cast steels. The ALLROUND cut offers the same benefits as PFERD' s cut plus but at faster stock removal rate. the unique tooth geometry reduces operational noise and vibration so doing increases overall operator comfort. advantages: increased rates. suitable for a variety of materials. good performance tool life. electric as well pneumatic drives. minimal noise. easy comfortable handling. specifications: shape: cylindrical with end head diameter: length: shank length including shank: operating instructions: observe following recommended rotational speed: steel cast hrc : rpm stainless soft non ferrous materials hard iron maximum overhang=\"10mm\" clamping depth=\"20mm\\n\" optimum use machines power output more than watts. only that are intended relevant tool. burr surface in contact workpiece should not exceed total circumference. this will prevent breakage due to excessive chattering. ensure correct personal protective equipment is worn while using further instructions or product information please visit www.pferd.com any our social media pages.\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of more than 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":48938214883617,"sku":"21001021","price":929.14,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220093382-spg-1020-6-allround-rgb-Primary.png?v=1736753792"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-cylindrical-shape-08mm-x-20mm-x-6mm-long-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Cylindrical Shape 08mm x 20mm x 6mm long shank","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape: Cylindrical with end cut (\u003cem\u003eZYA\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 8mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 170mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 10 000  18 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":48938419454241,"sku":"21101727","price":867.04,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220617632-zya-0820-6-z3-plus-sl-150-rgb-Primary.png?v=1736753791"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-cylindrical-shape-08mm-x-20mm-x-6mm-long-shank-copy","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Tree Shape 08mm x 20mm x 6mm long shank","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape: Cylindrical with end cut (\u003cem\u003eRBF\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 8mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 170mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 10 000  18 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":48938729570593,"sku":"21117627","price":1012.35,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/4007220617731-rbf-0820-6-z3-plus-sl-150-rgb-Primary.png?v=1736753790"},{"product_id":"pferd-tungsten-carbide-burr-ball-shape-12mm-x-10mm-x-6mm-shank-c3-plus","title":"PFERD Tungsten Carbide Burr  Ball Shape 20mm x 18mm x 6mm shank C3 Plus","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Ball \u003cem\u003e(KUD)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 18mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 58mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 4000  6000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  10 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 4000 - 5000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High temperature resistant Metals : 4000  7000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 7000  10 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 12mm\\n - Head Length: 10mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 51mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50469180178721,"sku":"21113026","price":1488.1,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/kud-2018-6-z3-plus-rgb.png?v=1736753753"},{"product_id":"pferd-tungsten-carbide-burr-flame-shape-12mm-x-30mm-x-6mm-shank","title":"PFERD Tungsten Carbide Burr Flame Shape 12mm x 30mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Pointed Tree Shape \u003cem\u003e(SPG)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 12mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 7 000  9 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 7 000  12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 12 000  16 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Plastics and Other Materials : 12 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50469228085537,"sku":"21303312","price":796.15,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/b-1230-6-mx-ncc-rgb.png?v=1736753752"},{"product_id":"pferd-tungsten-carbide-burr-set-15pc-x-03mm-diameter-cut-3-plus","title":"PFERD Tungsten Carbide Burr Set  15pc x 03mm diameter Cut 3 PLUS","description":"\u003cp\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet 1503  cut 3 PLUS  contains 15 small tungsten carbide burrs in the most common shapes and dimensions for general applications. The sturdy plastic box protects the tools from dirt and damage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSet consist of one Tungsten Carbide Burr of each of the following Shapes and Sizes:\u003c\/span\u003e\u003cbr\u003e- Cylindrical With End Cut ( ZYAS 03mm x 13mm x 03mm Shank)\u003cbr\u003e- Cylindrical With End Cut ( ZYAS 06mm x 13mm x 03mm Shank)\u003cbr\u003e- Ball Shape ( KUD 04mm x 02mm x 03mm Shank)\u003cbr\u003e- Ball Shape ( KUD 04mm x 03mm x 03mm Shank)\u003cbr\u003e- Ball Shape ( KUD 06mm x 05mm x 03mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 03mm x 13mm x 03mm Shank)\u003cbr\u003e- Cylindrical Shape with Radius End €œBullnose€ ( WRC 06mm x 13mm x 03mm Shank)\u003cbr\u003e- Pointed Tree Shape ( SPG 03mm\u0026amp;nbsp; x13mm x03mm Shank)\u003cbr\u003e- Pointed Tree Shape ( SPG 06mm x 13mm x03mm Shank)\u003cbr\u003e- Conical pointed Shape ( SKM 03mm x 11mm x0 3mm Shank)\u003cbr\u003e- Conical pointed Shape ( SKM 06mm x 13mm x0 3mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 03mm x 07mm x 03mm Shank)\u003cbr\u003e- Round Tree Shape (RBF 06mm x 13mm x 03mm Shank)\u003cbr\u003e- Oval Shape ( TRE 03mm x 07mm x 03mm Shank)\u003cbr\u003e- Oval Shape ( TRE 06mm x 10mm x 03mm Shank)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr\u003e- Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.\u003cbr\u003e- Long tool life.\u003cbr\u003e- The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.\u003cbr\u003e- High surface quality.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr\u003e- Observe the following recommended rotational speed:\u003cbr\u003e  Steel and Cast Steel \u0026lt;38 HRC : 48 000  64 000 RPM\u003cbr\u003e  Steel and Cast Steel \u0026gt;38 HRC : 27 000  37 000 RPM\u003cbr\u003e  Stainless Steel : 27 000  37 000 RPM\u003cbr\u003e  High Temperature Resistant Materials : 27 000  48 000 RPM\u003cbr\u003e  Cast Iron: 48 000 - 64 000 RPM\u003cbr\u003e- Maximum Overhang = 10mm\u003cbr\u003e- Clamping Depth = 20mm\u003cbr\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering.\u003cbr\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003c\/p\u003e\n\u003cp\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages\u003c\/p\u003e","brand":"PFERD South Africa","offers":[{"title":"Default Title","offer_id":50478496383265,"sku":"21901505","price":5367.45,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/1503-z3-plus-rgb.png?v=1729583081"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank-universal-cut","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 03mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 40mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000 - 64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000 - 64 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478833369377,"sku":"21352112","price":207.69,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0313-3-z3-plus-rgb.png?v=1736753739"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank-universal-cut-copy-1","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 06mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Stainless Steel : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 13 000 - 19 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Cast Iron : 24 000 - 32 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478859976993,"sku":"21352212","price":251.16,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0613-3-z3-plus-rgb.png?v=1736753738"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-06mm-x-13mm-x-3mm-shank-universal-cut-copy","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape with radius end 08mm x 20mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Cylindrical with radius end. (Bullnose - \u003cem\u003eWRC\u003c\/em\u003e)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 8mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 20mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 60mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 18 000 - 24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 10 000 - 14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Stainless Steel : 10 000 - 14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 10 000 - 14 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 18 000 - 24 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e Cast Iron : 18 000 - 24 000  RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478892351777,"sku":"21305112","price":542.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/wrc-0820-6-mx-ncc-rgb.png?v=1736753737"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-06mm-x-13mm-x-3mm-shank-universal-cut","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 06mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle data-mce-fragment=\"1\" type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : \u003cspan\u003eCylindrical without end cut\u003c\/span\u003e. (ZYA)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 43mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Steel and Cast Steel \u0026lt; 38 HRC : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Steel and Cast Steel \u0026gt; 38 HRC : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Stainless Steel : 13 000 - 19 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Hard Non Ferrous Metals : 13 000 - 19 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Soft Non Ferrous Metals : 24 000 - 32 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e Cast Iron : 24 000 - 32 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}'\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478901657889,"sku":"21351412","price":206.54,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-0613-3-mx-ncc-rgb.png?v=1736753735"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-with-radius-end-03mm-x-13mm-x-3mm-shank-universal-cut-copy-2","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape 03mm x 13mm x 3mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : \u003cspan\u003eCylindrical without end cut\u003c\/span\u003e\u003cspan\u003e. (ZYA)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 40mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 27 000  37 000  RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 48 000 - 64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 48 000 - 64 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478908506401,"sku":"21351312","price":186.99,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-0313-3-mx-ncc-rgb.png?v=1736753735"},{"product_id":"pferd-tungsten-carbide-burr-cylindrical-shape-16mm-x-25mm-x-6mm-shank-universal-cut-copy","title":"PFERD Tungsten Carbide Burr - Cylindrical Shape  16mm x 25mm x 6mm shank Universal Cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : \u003cspan\u003eCylindrical without end cut \u003c\/span\u003e\u003cem\u003e(ZYA)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 16mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 25mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 65mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 9 000 - 12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 5 000 - 7 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 5 000 - 7 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 5 000 - 7 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 9 000 - 12 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 9 000 - 12 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Cylindrical with radius end. (Bullnose)\\n - Head Diameter: 12mm\\n - Head Length: 25mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 65mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 12 000  16 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 7 000  9 000 RPM\\n  Stainless Steel : 7 000  9 000 RPM\\n  Hard Non Ferrous Metals : 7 000  9 000 RPM\\n  Soft Non Ferrous Metals : 7 000  12 000 RPM\\n  Cast Iron : 12 000  16 000 RPM\\n  Plastics and Other Materials : 12 000  24 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50478915060001,"sku":"21302012","price":861.81,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/zya-1625-6-z3-plus-rgb.png?v=1736753734"},{"product_id":"pferd-tungsten-carbide-burr-ball-shape-04mm-x-03mm-x-3mm-shank-universal-cut","title":"PFERD Tungsten Carbide Burr - Ball shape 04mm x 03mm x 3mm Shank Universal cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Ball \u003cem\u003e(KUD)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 4mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 34mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 36 000 - 48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 20 000 - 28 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 20 000 - 28 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 20 000 - 28 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 36 000 - 48 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 36 000 - 48 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Ball\\n - Head Diameter: 6mm\\n - Head Length: 5mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50479244673313,"sku":"21353212","price":250.99,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/kud-0403-3-mx-ncc-rgb.png?v=1736753733"},{"product_id":"pferd-tungsten-carbide-burr-pointed-tree-shape-06mm-x-18mm-x-6mm-shank-copy","title":"PFERD Tungsten Carbide Burr  Pointed Tree shape 03mm x 13mm x 3mm Shank Universal cut","description":"\u003cstyle type=\"text\/css\" data-mce-fragment=\"1\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for universal use.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Economic machining of a wide range of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape : Pointed Tree Shape \u003cem\u003e(SPG)\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 13mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 3mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 40mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOperating Instructions:\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" style=\"box-sizing: inherit;\"\u003eSteel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" style=\"box-sizing: inherit;\"\u003eSteel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" style=\"box-sizing: inherit;\"\u003eStainless Steel : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" style=\"box-sizing: inherit;\"\u003eSoft Non Ferrous Metals : 48 000  64 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" style=\"box-sizing: inherit;\"\u003eHard Non Ferrous Metals : 27 000  37 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\" style=\"box-sizing: inherit;\"\u003eCast Iron : 48 000  64 000 RPM\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n Advantages:\\n - Suitable for universal use.\\n - Good stock removal performance and tool life.\\n - Economic machining of a wide range of materials.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n \\n Specifications:\\n - Shape : Pointed Tree Shape\\n - Head Diameter: 6mm\\n - Head Length: 18mm\\n - Shank Diameter: 6mm\\n - Overall Length including shank: 55mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 24 000  32 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 13 000  19 000 RPM\\n  Stainless Steel : 13 000  19 000 RPM\\n  Hard Non Ferrous Metals : 13 000  19 000 RPM\\n  Soft Non Ferrous Metals : 13 000  24 000 RPM\\n  Cast Iron : 24 000  32 000 RPM\\n  Plastics and Other Materials : 24 000  48 000 RPM\\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 300  500 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 300  500 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50479261090081,"sku":"21356112","price":207.69,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/spg-0313-3-mx-ncc-rgb.png?v=1736753731"},{"product_id":"pferd-tungsten-carbide-burr-cut-3-plus-ball-shape-08mm-x-07mm-x-6mm-long-shank","title":"PFERD Tungsten Carbide Burr Cut 3 Plus Ball Shape 08mm x 07mm x 6mm long shank","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003ePFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdvantages:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for a variety of materials.\u003cbr data-mce-fragment=\"1\"\u003e- Good stock removal performance and tool life.\u003cbr data-mce-fragment=\"1\"\u003e- Suitable for Electric as well as Pneumatic Tool Drives. \u003cbr data-mce-fragment=\"1\"\u003e- Minimal vibration and noise.\u003cbr data-mce-fragment=\"1\"\u003e- Easy and comfortable handling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Shape: Ball shape (KUD)\u003cbr data-mce-fragment=\"1\"\u003e- Head Diameter: 7mm\u003cbr data-mce-fragment=\"1\"\u003e- Head Length: 8mm\u003cbr data-mce-fragment=\"1\"\u003e- Shank Diameter: 6mm\u003cbr data-mce-fragment=\"1\"\u003e- Overall Length including shank: 157mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOperating Instructions:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Observe the following recommended rotational speed:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026lt; 38 HRC : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Steel and Cast Steel \u0026gt; 38 HRC : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Stainless Steel : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Soft Non Ferrous Metals : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Hard Non Ferrous Metals : 10 000  14 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e High Temperature Resistant Materials : 10 000  18 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e Cast Iron : 18 000  24 000 RPM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"PFERD Tungsten Carbide Burrs are available in a variety of sizes and shapes, and consists of cuts suitable for coarse stock removal to fine finishing on numerous materials. PFERD milling tools are manufactured in compliance with the highest quality standards and offer outstanding quality, a long service life and excellent stock removal rates. \\n \\n PFERD Cut 3 Plus tungsten carbide burrs are suited for universal use on a variety of materials and applications. The cross cut  Cut 3 Plus - provides good stock removal, a high quality surface finish and a good service life. \\n \\n Advantages:\\n - Suitable for a variety of materials.\\n - Good stock removal performance and tool life.\\n - Suitable for Electric as well as Pneumatic Tool Drives. \\n - Minimal vibration and noise.\\n - Easy and comfortable handling. \\n \\n Specification:\\n - Shape: Cylindrical with end cut\\n - Head Diameter: 3mm\\n - Head Length: 13mm\\n - Shank Diameter: 3mm\\n - Overall Length including shank: 43mm\\n \\n Operating Instructions:\\n - Observe the following recommended rotational speed:\\n  Steel and Cast Steel \u0026lt; 38 HRC : 48 000  64 000 RPM\\n  Steel and Cast Steel \u0026gt; 38 HRC : 27 000  37 000 RPM\\n  Stainless Steel : 27 000  37 000 RPM\\n  Soft Non Ferrous Metals : 48 000  64 000 RPM\\n Hard Non Ferrous Metals : 27 000  37 000 RPM\\n  High Temperature Resistant Materials : 27 000  37 000 RPM\\n  Cast Iron : 48 000  64 000 RPM\\n  \\n - Maximum Overhang = 10mm \\n - Clamping Depth = 20mm\\n - For optimum performance use machines with a power output of 75 - 300 watts.\\n - Only use machines that are intended for use with the relevant tool.\\n - The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \\n - Ensure correct and suitable personal protective equipment is worn while using the tool.\\n \\n For further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\"}' data-sheets-userformat='{\"2\":15233,\"3\":{\"1\":0},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":2,\"2\":0},\"15\":\"Calibri, sans-serif\",\"16\":11}' data-mce-fragment=\"1\"\u003e- Maximum Overhang = 10mm \u003cbr data-mce-fragment=\"1\"\u003e- Clamping Depth = 20mm\u003cbr data-mce-fragment=\"1\"\u003e- For optimum performance use machines with a power output of 75 - 300 watts.\u003cbr data-mce-fragment=\"1\"\u003e- Only use machines that are intended for use with the relevant tool.\u003cbr data-mce-fragment=\"1\"\u003e- The burr surface in contact with the workpiece should not exceed 1\/3 of the total burr circumference. This will prevent tooth breakage due to excessive vibration and chattering. \u003cbr data-mce-fragment=\"1\"\u003e- Ensure correct and suitable personal protective equipment is worn while using the tool.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor further operating instructions or product information, please visit www.pferd.com or any of our social media pages.\u003c\/span\u003e\u003c\/p\u003e","brand":"PFERD","offers":[{"title":"Default Title","offer_id":50549556609313,"sku":"21112627","price":694.83,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/6746\/4481\/files\/kud-0807-6-z3-plus-sl-150-rgb.png?v=1736753726"}],"url":"https:\/\/pferdza.com\/collections\/burrs.oembed","provider":"PFERD South Africa","version":"1.0","type":"link"}